NI TB-414X, User Manual

USER GUIDE

TB-414X

Screw Terminal Connector Kit for PXIe-414x SMUs

This document explains how to install and use the TB-414X terminal block with a PXIe-414

x

source measure unit (SMU) and includes TB-414X specifications.

The TB-414X terminal block is used to convert the 25-position D-SUB connector of the
PXIe-414

x

 SMU to screw terminal connections while maintaining low leakage performance.

Read this document before you install, configure, operate, or maintain this product. Users are
required to familiarize themselves with installation and wiring instructions in addition to
requirements of all applicable codes, laws, and standards. Visit 

ni.com/manuals

 for more

information about your product, including specifications, pinouts, and instructions for
connecting, installing, and configuring your system.

Caution

Observe all instructions and cautions in the user documentation. Using

the product in a manner not specified can damage the product and compromise the
built-in safety protection.

Attention

Suivez toutes les instructions et respectez toutes les mises en garde de la

documentation d'utilisation. L'utilisation du produit de toute autre façon que celle
spécifiée risque de l'endommager et de compromettre la protection de sécurité
intégrée.

Notice

This device is intended for use only with the PXIe-4140, PXIe-4141,

PXIe-4142, PXIe-4143, PXIe-4144, PXIe-4145, and PXIe-4147 SMUs, which are
referred to collectively as PXIe-414

x

 SMUs. For more information about the

PXIe-414

x

 SMUs, refer to 

ni.com/manuals

.

Contents

Icons.......................................................................................................................................... 2
Getting Started with the TB-414X............................................................................................ 2

Kit Contents and Other Equipment...................................................................................2
Installing the TB-414X..................................................................................................... 3

TB-414X Specifications............................................................................................................7

Definitions.........................................................................................................................7
Voltage, Current, and Resistance...................................................................................... 8
Isolation.............................................................................................................................9
Screw Terminal Wiring..................................................................................................... 9