![background image](http://html.mh-extra.com/html/nilfisk-advance/advance-bu800/advance-bu800_how-to_1693181001.webp)
BU800 Battery Burnishers How To
Prepare for use
1
Unplug battery charger
.
Wrap cord accordingly.
2
Check/inspect bag.
Replace bag if needed.
3
Remove the skirt.
4
Inspect pad for wear.
5
Turn pad retainer
counter clockwise to
remove the pad.
6
Install new pad and
center on outside
diameter of the pad
driver.
7
Tighten pad retainer in
clockwise direction.
8
Prep area to remove
debris.
9
Turn the key switch to
turn the machine on.
Check battery power.
10
Palm buttons power the
pad drive and causes
the pad to spin and
lower to the floor
(
models without traction
).
11
Turn on pad power
switch. Press palm
buttons to drive
machine and lower pad
to the floor
(
traverse models
)
12
Press the speed control
button to adjust traverse
speed.
Press the reverse button
while pressing palm buttons
to move the
machine in
reverse
All manuals and user guides at all-guides.com
all-guides.com