Read all Instructions before
beginning!!!!
Caution – EXTREME DANGER – Caution
Do not use or mix any other manufacturer’s products with any Nitrous Express products.
Do not use or mix any Nitrous Express products with any other manufacturer’s products.
THESE INSTRUCTIONS APPLY TO NITROUS EXPRESS PRODUCTS ONLY!
FOR SANCTIONED RACE USE ONLY - NOT FOR SALE OR USE IN CALIFORNIA
Nitrous Express Speed3000 R/C Vehicle Nitrous System
Installation Instructions
The nitrous bottle is shipped empty and must be filled before the system can be used. The
bottle capacity is 4oz
Removal of the body and partial disassembly of your r/c vehicle may be necessary to access all
electronics and to complete the nitrous installation.
1.
Find the best and most secure location for the 9v battery to be mounted. This
location needs to be easily accessible, yet protected from possible damage while you
are operating the vehicle.
2.
Turn on your transmitter and your receiver and then go to full throttle. Place the
micro switch so that the servo arm activates the micro switch. Mark this location,
then drill and mount the micro switch.
