background image

Acuity Brands  |  One Lithonia Way  Conyers, GA  30012  Phone: 800.535.2465  www.acuitybrands.com/nLight

© 2019-2020 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 05/15/20

nDTC

1 of 4

 

 

Example:  nDTC NPWS WH

Switch

Power Supply Type

Color

nDTC

[blank]

Includes PS150

PS347

Includes PS150-347

NPWS

No Power Supply

WH

White

BK

Black

OVERVIEW

The nDTC is a low voltage powered capacitive touch screen digital time clock that delivers smart and simple 

scheduling, dimming, switching, occupancy and photosensing for small-to-medium projects that require 

minimal footprint and flexibility of configuring. Available as a single gang wall-mount, or pre-assembled 

to an ARP panel, the device communicates with an nLight Wired network and supports up to 127 digital 

devices in an nLight control zone.

FEATURES

• 

Create and control up to 32 schedules (Normal & Holiday)

• 

Controls up to 127 nLight devices

• 

Password protected configuration

• 

Optional password protected lock out

• 

Proximity screen sensor for auto “wake-up”

• 

Slim and compact form factor

• 

3.5” full-color responsive capacitive touch screen

• 

Mounts to a single gang switch box (Standalone version)

nLight nDTC 

Touch Screen  
Digital Time Clock

Catalog Number:

Date:

Project:

Warranty

 

Five-year limited warranty. Complete warranty terms located at:  

www.acuitybrands.com/support/customer-support/terms-and-conditions

Note

: Actual performance may differ as a result of end-user environment and application. 

Specifications subject to change without notice.

ORDERING INFORMATION

Summary of Contents for nDTC

Page 1: ...to an ARP panel the device communicates with an nLight Wired network and supports up to 127 digital devices in an nLight control zone FEATURES Create and control up to 32 schedules Normal Holiday Controls up to 127 nLight devices Password protected configuration Optional password protected lock out Proximity screen sensor for auto wake up Slim and compact form factor 3 5 full color responsive capa...

Page 2: ...cilitate CAT5e daisy chain connection with other nLight enabled devices and a set of power terminals where low voltage power is connected from the provided PS 150 power supply module Mounting Instructions Wall Mount Version The device should be installed approximately 6 15cm from a corner to provide sufficient access to the faceplate release tabs Allow for proper clearance around the device s encl...

Page 3: ...insert them through the central hole of the back plate 4 Make sure that the mounting surface is flat and clean 5 Screw the back plate onto the electrical junction box 6 Plug the wire s into the connector s Gently push excess wiring back into the wall 7 Reattach the front plate and make sure it clips tightly into place Tighten the security screw 8 Upon restoring power unit will begin discovering co...

Page 4: ...ent Equipment FCC Rules Part 15 Subpart B Class B Mechanical Dimensions 5 18 H x 3 37 W x 0 75 D 131 5mm x 85 5mm x 19mm Mounting Single Gang Box or Low Voltage Ring Connection Type RJ 45 nLight Network Ports 2 Low Voltage Terminals Color White Black Environmental Warrantied Operating Temperature Standard 32 F to 122 F 0 C to 50 C Relative Humidity Up to 90 Non Condensing Standards Rating RoHS Gen...

Reviews: