Thank you for purchasing this Colorado Colour-Changing Tree. This tree assembles in less than one minute and is decorated
with LED light sets. For your convenience, it is equipped with a foot pedal switch for changing lighting functions.
• 3 pre-lighted tree sections (A - Top Section, B - Middle Section , C - Bottom Section)
Note: Before you start to assemble your tree, please choose a location near an electrical wall outlet. Place the tree
1. Unfold the tree base and insert the screw into the hole.
This 7
’ (2.3 m) tree is pre-strung with 500 lights.
½
• 1 sturdy metal tree stand
• 1 spare replacement fuse (3 A) for the power plug
FOR INDOOR/SEASONAL USE ONLY
ASSEMBLY:
stand on a level surface.
Please remove protective covers from the base of the pole from each section.
CARTON INCLUDES:
• 1 screw for tree stand
• 8 extra 3 V replacement LED bulbs
2. Carefully insert the bottom section (C) of the tree into the tree base and tighten the screws (see Fig. 1).
• 1 power supply cord with foot pedal switch
IMPORTANT:
Please read this manual carefully before assembly and save it for reference.
model no
.
|
www.noma.com
CTI1515594
INSTRUCTION MANUAL
For indoor use only
Retain carton for storage purposes
Instruction Manual
7 ½' Colorado Colour-Changing Tree
CAUTION!
-
ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE
BEFORE ASSEMBLING OR DISASSEMBLING.
• 2 bolts
A
B
C
Fig. 2
Fig. 3
Tree base
Fig. 1
USE
O
NLY
USE
ONL
Y
125V
FUSE
125V
FUSE
3A
MAX.
TS-M7
Foot pedal
switch
Foot pedal
switch
Fig. 6
Side
view
Side
view
Fig. 5
Fig. 4
protuberance
concave
