background image

8807517     08/13

2 GALLON AIR COMPRESSOR

DO NOT RETURN TO

STORE. Please CALL 800-

348-5004 for parts and

service.

CALIFORNIA PROPOSITION 65
WARNING:

You can create dust when you
cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or
other masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of
California to cause cancer and
birth defects or other
reproductive harm. Wash
hands after handling.

CAUTION:

FOR YOUR OWN SAFETY
READ INSTRUCTION MANUAL
COMPLETELY AND
CAREFULLY BEFORE
OPERATING THIS

AIR COMPRESSOR. Failure to
follow all instructions as listed
below may result in electrical
shock, fire, and/or serious
personal injury.

Specifications:
Running Horsepower: 

1/3 HP

CFM @ 40PSI: 

1 CFM

CFM @ 90PSI: 

.5 CFM

Voltage - Single Phase: 

120 V

Motor RPM: 

2900 RPM

Amperage: 

2.6 amp

Tank Size: 

2 Gallon

SAFETY WARNINGS

WARNING: Improper operation
or maintenance of this product
could result in serious injury
and/or property damage. Read
and understand all of the
warnings and safety
instructions provided before
using this equipment.

CAUTION: The air compressor
should be operated on a
dedicated 15-amp circuit. If the
circuit does not have 15 free
amps available, a larger circuit
must be used. Always use
more air hose before utilizing
extension cords. Low voltage

could cause damage to the
motor.

Risk of moving parts: 

If the

air compressor is in operation,
all guards and covers should
be attached or installed
correctly. If any guard or cover
has been damaged, do not
operate the equipment until the
proper
personnel have correctly
repaired the equipment. The
power cord should be free of
any moving parts, twisting
and/or crimping while in use
and while in storage.

Risk of burns: 

There are

surfaces of your air compressor
that while in operation and
thereafter can cause serious
burns if touched. The
equipment should be allowed
time to cool before any
maintenance is attempted.
Items such as the compressor
pump and the outlet tube are
normally hot during and after
operation.

Risk of falling: 

Operation of

the air compressor should
always be in a position that is
stable. Never use the air
compressor on a rooftop or

Model: 7517

For Customer Service, please call 

1-800-348-5004

 or 

email 

feedback@natitools.com

1

Summary of Contents for 7517









Reviews: