ENGLISH
GREAT BRITAIN • CUSTOMER SERVICE
tel. 0845 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
ENGLISH
Ver
. 20140314
LED Garden Spotlight Set
Art.no 18-2689
Model JF-CP005-UK
36-4808 JF-CP005
Please read the entire instruction manual before use and save
it for future reference. We reserve the right for any errors in text
or images and for making any necessary technical changes to
this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety instructions
• Directions and safety instructions must be strictly adhered to.
• The transformer is of Safety Class II (double-insulated) and
should therefore not be earthed.
• Always make sure that the power is switched off before
assembling the spotlight, changing light bulbs or
performing any other kind of work on the spotlight.
• Do not use the spotlights in environments where they could
be exposed to flammable gas, steam or dust.
• Do not overload the transformer.
• Never connect anything other than the included spotlights
to the supplied transformer.
• Do not supplement the spotlight set by adding more lights
than were included in the package and only use parts
intended for use with this spotlight set.
• This product must not be modified or adapted in any way.
• Use of the product other than that described above could
damage it and/or cause another kind of hazard such as
short-circuiting, fire or electric shock.
• If any part of the spotlight set is damaged in such a way
that it could be hazardous, turn off the power and unplug
the spotlight set immediately.
• The transformer’s power cable must not be replaced.
A damaged transformer cannot be repaired and must be
discarded. Only let a qualified technician perform repairs,
using only genuine spare parts.
• Switch the power off before carrying out any work in
the vicinity of the garden spotlights. Before the power is
turned on again you should check carefully to make sure
that the cable or the transformer have not been damaged
by any garden tools.
• Only push the spike into the ground up to the collar, no deeper.
Package contents
• Instruction manual
• 2 spotlights with connection cables and ground spikes.
• Transformer with mains cable
• Extension cable
• Cable guard (inside the bottom end of the upper tube)
Product description
Assembly instructions
Carefully check that the spotlights and transformer are
undamaged before assembly.
1. Decide where to put the garden spotlights.
2. Screw the tubes together (first make sure that the cable
guard is in place under the cable, if it has worked loose
in transit; press it back into the upper tube).
3. Connect the extension cable to the transformer and then
screw the threaded cover sleeve over the connection.
4. Connect both of the spotlight connection cables to
the extension cable.
5. Place the spotlights in the desired locations and push
the spikes into the ground. Only push the spikes down up
to the collar on the shaft.
6. Pivot the spotlights to the desired angles.
7. Plug the transformer into the wall socket and adjust
the beam angles using the rings on the spotlights.
Care and maintenance
• Follow the safety instructions carefully.
• The transformer is maintenance-free and cannot be opened.
• The spotlights can be cleaned using a sponge and warm
water with a little mild detergent added. Never use solvents
to clean the product.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local authority.
Technical data
LED wattage
3 W
Transformer
Prim: 230–240 V AC, 50 Hz
Sec: 12 V, 6 VA (36-4808)
12 V, 0.83 A (18-2689)
Length of extension cable
3.5 m
Length of connection cable
1.6 m
Height above ground
Approx. 300 mm
Protection class
IP44
• Aluminium garden spotlights
for use with 230 V/50 Hz.
• Bright 3 W LED with
adjustable beam angle.
• The garden spotlight set is
weatherproof and designed
for year-round use.
• Toughened glass LED
safety cover.
• Multidirectional, ball joint
pivoted head.