1
3625 Cincinnati Avenue, Rocklin CA 95765 ● 855-388-7422 ● techsupport@northernvideo.com
MODEL: EOCCPK Ethernet Power Over Coaxial Master/Slave Transceiver
Description:
The
EOCCPK
is designed to extend IP Ethernet transmission and forward power over coaxial cable to
IP POE cameras. The
EOCCPK
has a transmission distance up to 600m/1968ft (RG6) and is extremely
simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
Features:
No PC required, plug & play design reduces the cables and power distribution cost
Transmits IP camera signals or other 10/100 Base-T Full Duplex IP devices over coaxial cable
Injects power over an existing coaxial cable to IP POE cameras
Up to 600 Meter transmission distance when using RG6 cable / 1640ft. using RG59 cable
Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
SPECIFICATIONS
:
MODEL
EOCCPK
Extender Interface
Connector Type
1x BNC
Cable Type
75-ohm RG59, RG6, or RG11 video-grade coaxial cable
Max. Transmission Distance
600m (1968ft.) for RG6 coaxial cable / 500m (1640ft.) for RG59
Ethernet Interface
Connector Type
1x RJ-45 with LEDs on Connector
Cable Type
Straight through or cross-over Cat5/Cat6 Cable, Auto MDI/MDIX
Rate
IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half
duplex
Output Voltage
IEEE 802.3af/at PSE@ RJ45 Port
Control & Indicators
Color LED Indicator for Coaxial
Data Signal Strength
Green
：
GOOD (Link speed > 60 Mbps)
Amber
：
MEDIUM (Link speed 20~60Mbps)
Red
：
BAD (Link speed < 20Mbps)
OFF
：
NO LINK
Yellow LED (On RJ45)
Power On
Green LED (On RJ45)
Link/Act.
