Easy to follow
step by step
instructions
2
Lower cross brace
1
Facing the front of the walker, point the end
of the tray with the drink inserts downward
and position the 2 lower tray clamps above
the lower cross brace of the walker. Clamp
on all 4 of the tray clamps onto the frame.
Check all 4 clamps and ensure that they are
fully attached and secure.
HOW TO
ATTACH AND FOLD YOUR
Item # 436T
For use with folding walker model # 4070, 4080, 4090
Capacity not to exceed 5 lb
Folding Walker Tray
No tools required
Quick Assembly
ATTACHING TRAY TO WALKER
1
FOLDING THE TRAY
To use the tray in the table top position, pull out and up
on the front end of the tray. Slide the tray back until the
side slots of the tray are fastened and locked in place.
Ensure that the tray is leveled.
To stow tray, lift up and push forward on the back end
of the tray until it drops down in front of the walker.
Side slot
HOW TO CLEAN
Use water and a mild, non-abrasive cleaner to clean the walker tray. DO NOT use an abrasive
detergent or cleaner. Doing so can cause discoloration or staining.
