1
USER INSTRUCTIONS
FOLDING EASYFIT BED RAIL
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in a
safe place for future reference.
1. INTENDED
USE
The Folding EasyFit Bed Rail provides stable support to aid adult users (taller than 1.46m) transfer in and out of bed,
moving from a lying to a sitting position as well as assist user repositioning. This product is suitable for all sized divan
and framed beds, and can be
fi
tted to either side of the bed. Supplied with bed rail straps for additional security.
P42809
Folding EasyFit Bed Rail (with straps)
Maximum User Weight
20st
127kg
2. SAFETY
318mm
Min
WARNING:
To avoid possible entrapment, you must
always position the product a minimum of 318mm from
the headboard or footboard.
WARNING:
To avoid possible entrapment, you must
always position the product a minimum of 318mm
from solid objects/furniture such as bedside drawers or
cabinets.
WARNING:
The maximum user weight must not be more
than 127Kg (20st).
YOU MUST
carry out a risk assessment to assess the
use and suitability of the bed rail in relation to the users
physical and cognitive ability, as well as the surrounding
environment.
DO NOT
install this product to a damaged bed.
MAKE SURE
there is no gap between the bed rail and
the mattress.
ALWAYS
use the bed securing straps provided when
fi
tting to a divan bed.
REGULARLY
check the straps are tight and the device is
stable and
fi
rmly
fi
tted.
DO NOT
fi
t this product to medical or pro
fi
ling beds.
3. UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are missing or
damaged and do not try and assemble.
1
2
3
6
4
5
Figure 1: EasyFit Bed Rail Assembly
3.1 Contents
Note:
The Folding EasyFit Bed Rail is supplied pre-
assembled in the folded position.
1. Bed Rail Handle
4. Plastic Saddle-Washers x 2
2. Bed Rail Base
5. Steel Bolts x 2
3. Plastic Wing-Nuts x 2
6. Bed Rail Straps
4. ASSEMBLY
1. Refer to Figure 1. The bed rail handle (1) can be
rotated in both directions, please make sure it is in
the correct position for your installation.
2. Unscrew the two plastic wing-nuts (3), then remove
the two plastic saddle-washers (4) and the two
bolts (5).
4.1 Right-Hand Side Assembly
Footboard
Headboard
1
3
4
5
2
Figure 2: RHS Assembly
