background image

 

nsisolutions.com

 

English 

Rev B 

Top Polish Kit, Granite & Quartzite

 

 

INSTRUCTIONS 

 

 

 

 

 

 

 

 

 

 

 

         SL3-TPKIT-1 

 

Please read this instruction manual thoroughly to ensure safety and the correct use of this kit.  Keep this 

manual in a place where operators can access it easily, anytime necessary. 

 

INTRODUCTION 

Thank you for purchasing the NSI Solutions Top Polish Kit, Granite & Quartzite.  This top polish kit has 
been designed, tested and assembled by stone fabricators with extensive experience in repairing and 
polishing natural “true” granite and natural quartzite counters and is equally applicable to repairs made 
in the home or in the fabrication shop.  Keep these instructions in a place where operators can access 
them easily.  This kit is not intended for engineered stone or marble. 

________________________________________________________________ 

** NOTE - This kit is intended for and has been tested on many types of “true” granite and 
natural quartzite and can work well on many different types of stone.  But, it is not 
guaranteed to work on every type of stone that may be commercially referred to as “granite”.  
Always test and practice on similar scrap stone before beginning a repair on the final piece. 

________________________________________________________________ 

 

 

 

 

 

 

Scan QR Code to see resources and videos regarding this Top Polish Kit 
or visit us at: 

nsisolutions.com

 or YouTube channel 

NSITools

Proudly Designed & Assembled in the U.S.A. from Global Components 

 

Summary of Contents for SL3-TPKIT-1











Reviews: