background image

1.0 Introduction

The Nuaire mrXbox90S is a heat recovery unit with an efficiency 

of 90% and energy saving constant volume fans. The unit is supplied

ready for use.  

The unit has the following functions:

•  steplessly adjustable air flow rates through a control panel

•  filter indication on the unit

•  frost protection system that ensures optimum performance of 

the unit, even at very low atmospheric temperatures

• the unit comes ready for use

• all control equipment has been mounted and checked in the 

factory 

• on installation, the appliance must be connected to the air

ducts, the condensate discharge, the mains supply and the

multiple switch

• the installer can change the desired air flow for every setting

with the aid of the control panel on the unit

1.1 Specification

Supply Voltage 

230V~50Hz

Protection Rating 

IP 31

Dimensions (WxHxD) 

560x600x315mm

Duct diameter  

125mm

External diameter condensate discharge 20mm

Mass  

28 kg

Filter class 

G4*

Ventilation capacity setting 1,  Factory setting 75 m

3

/h

Ventilation capacity setting 2,  Factory setting 100 m

3

/h

Ventilation capacity setting 3,  Factory setting 150 m

3

/h

Permissible resistance duct system 150 pa at 180 m

3

/h

* Filters supplied to be replaced post commissioning.

Coding: mrXbox90S

1.2 Function components

Interior temperature sensor measures the temperature of the air 

from the dwelling.

Heat exchanger ensures heat transfer between inlet and outlet air.

Filters filter both air flows.

4  Atmospheric temperature sensor measures outside air temperature.

Communication connection port for cable to multiple switch.

Plate fitted with swivel for feeding through power cable.

Inlet fan feeds fresh air into the dwelling.

8  Basic pcb contains the control electronics for the basic functions.

Computer port connection for service purposes.

10  Control panel Interface between user and control electronics.

11 

Outlet fan discharges fouled air from the dwelling to the

atmosphere.

12  Duct spigots connections for the inlet and outlet ducts.

13  Connection condensate discharge.

1

Leaflet Number 671366 July 2007

mrXbox90S

Mechanical Ventilation with Heat Recovery

Installation and Maintenance

Before commencing work, please read this 

installation guide throughout in conjunction 

with the appropriate illustrations.

5

6

7

8

11

9

10

13

1

2

3

4

12

Figure 1. Exploded view of unit

Nuaire Limited

Western Industrial Estate  Caerphilly   United Kingdom  CF83 1NA  T: 029 2088 5911   F: 029 2088 7033 

E: info@nuaire.co.uk   W: www.nuaire.co.uk

3

Summary of Contents for mrXbox90S

















Reviews: