background image

OPERATING INSTRUCTIONS

OAKTON

®

35630-00, 35630-02

Portable pH/CON 10

and Waterproof 

pH/CON 10 Meter

Printed in Singapore. 06/00

68X230403 00702-09 rev 06/00

pH/Conductivity/ C Meter

HOLD MODE

ON

OFF

CAL

MEAS

 C

MEAS

pH

ATC

pH/Con 10 Series

ENTER

12. Warranty

OAKTON warrants this meter to be free from significant deviations in material 
and workmanship for a period of one year from date of purchase. OAKTON
warrants this probe to be free from significant deviations in material and 
workmanship for a period of six months from date of purchase. If repair or 
adjustment is necessary and has not been the result of abuse or misuse within 
the warrantied time period, please return—freight prepaid—and correction will 
be made without charge. OAKTON alone will determine if the product problem 
is due to deviations or customer misuse.

Out-of-warranty products will be repaired on a charge basis.

13. Return of items

Authorization must be obtained from our Customer Service Department before
returning items for any reason. When applying for authorization, please include
data regarding the reason the items are to be returned. For your protection, items
must be carefully packed to prevent damage in shipment and insured against possi-
ble damage or loss. We will not be responsible for damage resulting from careless or
insufficient packing. A restocking charge will be made on all unauthorized returns.

NOTE: We reserve the right to make improvements in design, construction, and

appearance of products without notice.

pH/Conductivity/

°

C Meter

pH/CON 10 Series

WATERPROOF

MODE

HOLD

ENTER

RANGE

ON

OFF

CAL

MEAS

ATC

READY

MEAS

 C

µ

S

Summary of Contents for 35630-00













Reviews: