ObiHai Obi300 and
Obi302 ATA’s
Obihai ATAs Power Light Statuses
-
Red
- Not Connected- potential reason being a Faulty AC Adapter
-
Blinking Red
- Applying firmware. Do not unplug the ATA during this process as chances are
this will render the device unusable. If this happens and the device becomes unusable the pow-
er light will alternate red and green.
- When you see the power light alternating red and green this is an indicating factor that
the device is unusable. We commonly see this when the device is unplugged during
a firmware application. If this is happening, please reach out to Granite’s NOC
(844-4786621) to work on a resolution.
-
Blinking Green
- Device not receiving an IP. ObiHai ATAs are auto configured with DHCP. The
blinking green light indicated that something is preventing the device from getting its IP.
clienttraining@granitenet.com | 866.847.1500 | Granite Telecommunications
