UNPACKING
After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing, or
damaged parts. If any damage is observed, a shipping damage
claim must be filed with carrier. Do not use the OEMTOOLS Drill
if broken, bent, cracked or damaged parts (including labels)
are noted. Any Drill that appears damaged in any way, operates
abnormally or is missing parts should be removed from service
immediately. If you suspect that the Drill was subjected to shock
load (a load that was dropped suddenly, unexpectedly, etc.)
immediately discontinue use until it has been checked by a
factory authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all
safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please
retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Drill under the safest possible conditions. Any tool or piece of equipment
can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions are to provide
the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your service system.
Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone that uses the equipment understands and follows
these safety instructions as well.
Operating Instructions and Parts Manual
24482
10/15
2015 OEMTOOLS
HEAVY DUTY 1/2” 2VSR
Thank you very much for choosing an OEMTOOLS Product!
For future reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin
using it. This product is designed for certain applications only. OEMTOOLS cannot be responsible for issues arising from modification. We strongly
recommend this product is not modified and/or used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the product until you have first contacted OEMTOOLS to determine if it can or should be
performed on the product.
Explanation of Safety Signal Words
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
: Provide clarity and helpful information.
WARNING
CAUTION
NOTES
WARNING
