background image

UNPACKING

After unpacking the unit, inspect carefully for any 

damage that may have occurred during transit. Check 

for loose, missing, or damaged parts. If any damage 

is observed, a shipping damage claim must be filed 

with the carrier. DO NOT use the OEMTOOLS™ 

24493/24494/24499 R2 Rechargeable Speed Ratchet if 

broken, bent, cracked or damaged parts (including labels) 

are noted. Any Speed Ratchet that appears damaged in 

any way, operates abnormally or is missing parts should 

be removed from service immediately. If you suspect 

that the Speed Ratchet was subjected to shock load (a 

load that was dropped suddenly, unexpectedly, etc.), 

immediately discontinue use until it has been checked 

by a factory authorized service center. 

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and 
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal 
injury and/or damage to product or property. Please retain instructions for future reference.

The following safety information is provided as a guideline to help you operate your Speed Ratchet under the 

safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe 

handling instructions are not known or not followed. The following safety instructions are to provide the user with the 

information necessary for safe use and operation. Please read and retain these instructions for the continued safe use 

of your Speed Ratchet. Failure to follow instructions listed below may result in serious injury. In addition, make sure 

that anyone who uses the equipment understands and follows these safety instructions as well.

 Operating Instructions and Parts Manual 

24493/24494/24499

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

customerservice@oem-tools.com

Thank you very much for choosing an OEMTOOLS

 Product!

For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:

Model: _______________ Purchase Date: ___________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar 

with this product before you begin using it. This product is designed for certain applications only. OEMTOOLS™ 

cannot be responsible for issues arising from modification. We strongly recommend that this product is not modified 

and/or used for any application other than that for which it was designed. If you have any questions relative to a 

particular application, DO NOT use the product until you have first contacted customer service to determine if it can or 

should be performed on the product.

Explanation of Safety Signal Words

WARNING

:

 

 

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

:

 

 

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION

:

  Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may 

result in property damage.

NOTES

:

 Provide clarity and helpful information.

R2 RECHARGEABLE 

SPEED RATCHET

1

11/18

2018 OEMTOOLS

WARNING

WARNING

:

  This product can expose you to chemicals, including lead, which are known to the State of California to 

cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Summary of Contents for 24493

















Reviews: