Pressurized Front Fork Kit for Kawasaki ZX-6R
FGR 156
Mounting Instructions
arningg!
⚠
Only approved Öhlins personnel are permitted
to install this kit. The procedure requires
specific tools. Before you install this product,
read the Öhlins Owner’s manual. This product
is an important part of the vehicle and the
vehicle stability.
oteg!
1
Before you install this product, check the kit
contents. If anything is missing, please contact
an Öhlins dealer.
Kit Contents
Description
Part o
Pcs
Front Fork Kit
FGR156
1
Sticker Tech. Inside wh
00191-32
2
Sticker Tech. Inside bl
00191-33
2
Spring 10,5N/mm
04744-05
2
Spring 10 N/mm
04744-10
2
Spring 9,5 N/mm
04744-95
2
Owner’s manual
07286-01
1
Plug
21652-02
2
oteg!
1
Please note that during storage and transport,
especially at high ambient temperature, some
of the oil and grease used for assembly may
leak and stain the packaging. This will not
cause damage to the product, wipe off the
excessive oil or grease with a cloth.
oteg!
1
Please note that there can be small differences
between your product and the images in
these instructions.
oteg!
1
After this procedure the compression adjuster
will no longer be usable.
Oil, grease and threadlocker
Function grease CaH92
00159-01
Öhlins front fork fluid
01309-xx
Threadlocker, high, Loctite 2701
01791-05
Recommended tools
Fork tube tool Ø41
00786-08
Cyl. tube holder Ø36
or Soft jaws 28/36
00787-07
00727-09
Top cap tool
00797-08
Pull-up tool
01765-03
Seal head tool
01797-07
Seal head tool
01797-09
