Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
www.ohlins.com
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To find the latest information contact
your Öhlins distributor. Please
consult your Öhlins dealer if you
have any questions regarding the
contents in this document
.
Shock Absorber for Suzuki GSXR600/ 750
SU 789
Mounting Instructions
Part No. Pcs.
Shock absorber
SU 789
1
Öhlins Sticker
00192-01 2
Memo Notes Sticker 01180-01 1
Owner’s Manual
07242-01 1
Before installing this product, check the
contents of the kit. If anything is missing, please
contact your nearest Öhlins dealer.
Kit Contents
Recommended set-up
Spring Preload
13 mm
Rebound
13 clicks
Compression
12 clicks
Set-up Data
Adjustments
Please note that during storage and
transportation, especially at high ambient
temperature, some of the oil and grease
used for assembling may leak and stain the
packaging. This is in no way detrimental to the
product, wipe off the excessive oil/grease with
a cloth.
Part no. SU789_2
Issued 2010-11-09
Spring Preload
Adjuster
Warning!
Before installing this product, read the Öhlins
Owner’s Manual. The shock absorber is an
important part of your vehicle and will affect the
stability.
Warning!
Before riding, always make sure that the
basic settings made by Öhlins are according
to recommended Set-up Data. Read about
adjustments and setting up in the Öhlins
Owner’s Manual before you make any
adjustments. Contact an Öhlins dealer if you
have any questions about setting up the shock
absorber.
Rebound
Adjuster
Length Adjuster
Compression
Adjuster
Compression and Rebound Adjuster
!
Total length
320 +3 mm
Stroke
63 mm
Spring; Free length 160 mm
Spring rate
95 N/mm
Spring
21040-29
(90 N/mm)
+
-
Use a 3mm Allen key
to adjust.
