background image

Mounting Instructions

Öhlins shock absorber kit

YA 314 for Yamaha Fazer 600

© Öhlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the

written permission of Öhlins Racing AB is prohibited. Printed in Sweden.

Öhlins shock absorber 46 DR

Your Öhlins shock absorber type 46 DR features
the following adjusters:

Rebound damping adjuster

Adjuster wheel on the piston shaft above the end
bracket.

Spring pre-load adjuster

Adjustments are made by turning the rings on
the cylinder tube. Clockwise for harder
adjustment, counter clockwise too release the
pre-load.

NOTE!

When delivered the Öhlins shock absorber is
dialed to recommended settings for the specific
brand and make of the motorcycle. If you have
changed the setting check like this:

The adjusters have a normal right hand thread. Turn
the damping adjusters clockwise to fully closed (pos.
zero [0]). Turn counter clockwise to open and count
the clicks until you reach the recommended number
of clicks. See Setup data at last page.

CAUTION!

Do not use too much force, delicate sealing sur-
faces can be damaged.

Rebound
damping
adjuster

Spring pre-
load adjuster

Öhlins Racing AB, Box 722, S-194 27 Upplands Väsby, Sweden.

Phone +46 8 590 025 00. Fax +46 8 590 025 80.

www.ohlins.com

Part No. Y

A

 314. Issued 03 09 18

Setup data

Shock absorber length

305 mm

Shock absorber stroke

58 mm

Spring preload

10 mm

Rebound damping adjuster

13 clicks

Compression damping adjuster 10 clicks

Checking sag and ride height

Front suspension

F1. Bike on a stand with the

suspension fully extended

= ............

F2. Bike on the ground without rider = ............

F3. Bike on the ground with rider

= ............

Free sag

F1 - F2 = ............

Ride height

F1 - F3 = ............

Rear suspension

R1. Bike on a stand with the

suspension fully extended

= ............

R2. Bike on the ground without rider = ........... .

R3. Bike on the ground with rider

= ............

Free sag

R1 - R2 = ............

Ride height

R1 - R3 = ............

Bike on a stand.

F1

R1

Bike on the ground.

F2

R2

Bike with rider on.

F3

R3

Reviews: