background image

SHD4-755AI-VD

SSD4-742AI-VD

 

 

OKIUSA Rev.03/06 

             

 

     

.If the video product has been dropped or the cabinet 

has been damaged.   

                                                                               

 

.When the video product exhibits a distinct change in 

performance.  

     

 

 

 

 
1. Lead (Pb) Free RoHS Compliance (SHD4-755AI-VD 

model only).

 

2. 

Equipped with SONY HQ1 DSP (SHD4-755AI-VD model 

only). 

3. Long life and high reliability are achieved by the use of a 

CCD image device. This makes the camera 100% solid 
state. An image tube is no longer needed.   

4. Built-in Aspherical lens   
5. No focus shift in the nighttime.     
6. Relatively no interference from magnetic or electrostatic 

field.  

7. Ease of use in any application is achieved through the 

small shape.                 

8. Lower power consumption. 
                               
                                                                                                                     

                           

                 

                     

       

       

1. Never point the camera toward the sun   

    Do not expose the lens directly to the sun or to strong light 

as this may damage the pick-up device.   

2. Handle this camera with care   

  Avoid any shock or bumping of the camera. Improper 

handling could damage the camera.   

3. Requires a proper operating environment   

  This camera is designed for indoor use. The allowable 

temperature range for operation of this camera is between 
-10

~50

 and the allowable humidity is 85%RH 

maximum.  

4. Clean the front face to the pick-up device   

  It is recommended that the pick-up device surface be 

cleaned before lens installation or whenever the lens is 
changed. Cleaning should be done by using a chamois

very fine soft cloth

lens tissue or cotton tipped applicator 

and ethanol to carefully remove any fingerprint or dust. 

5. Check the power source voltage   

  The power source voltage should be within the specified 

range. (Camera must meet the specifications).   

6. Objects and liquid entry   

  Never push objects of any kind into this camera as this 

may touch dangerous voltage points of short out parts that 
could result in a fire or electric shock. Never spill any kind 
of liquid on the video product.   

7. Servicing 

    Do not attempt to service this video product by yourself as 

opening or removing covers may expose you to dangerous 
voltage or other hazards. Refer all service to qualified 
servicing personnel. 

 

8. Damage requiring service   

  Unplug this video product from the wall outlet and refer 

service to qualified servicing personnel under the following 

conditions:  

     

.When the power supply cord or plug is damaged.   

     

.If liquid has been spilled, or objects have fallen into the 

video product.   

1/3” Color Varifocal Vandal Proof Dome Camera

     

.If the video product has been exposed to rain or water.   

 

Optional:  

MB-HVANDAL

 

                                                                                                       

                                                                                                                   

SPECIFICATIONS

Wall Mount Bracket 

Model 

SHD4-755AI-VD 

SSD4-742AI-VD 

Image Sensor 

1/3” SONY Super HAD CCD 

DSP SONY 

HQ1 

SONY 

Number of Total Pixels

NTSC: 811(H)×508(V) 

PAL: 795(H)×596(V) 

NTSC: 537(H)×505(V) 

PAL: 537(H)×597(V) 

Video Output 

1.0Vp-p Composite/75 Ohm 

Resolution 550TVL 

420TVL 

Minimum Illumination 

0.25 Lux @ F1.2 

0.15 Lux @ F1.2 

Signal to Noise Ratio 

More than 50dB 

(AGC OFF) 

More than 48dB 

(AGC OFF) 

Synchronizing System

Internal 

Electronic Shutter   
Speed Mode 
Back Light 
Compensation 
Auto Gain Control 
Flickerless 

 

ON/OFF 

DC Level 

The VR for adjusting the IRIS level of 

Auto Iris Lens

 

White Balance 

AWB

 

2500°K ~ 9200°K 

Lead Free 

YES 

N/A 

Lens/Angle of View 
(Horizontal) 

Standard : 3.8mm-9.5mm/F1.2 Aspherical 
                      Auto Iris Lens /74.2°~30.0° 
Optional : 2.5mm-6.0mm/F1.3 Aspherical 
          Auto Iris Lens /108.2°~47.6° 
                    9.0mm-22.0mm/F2.0 Auto Iris Lens 
           /29.2°~13.0° 

Power Supply 

Standard: 

12V DC / 170mA ; 

Optional: 

12V DC / 24V AC

 

Standard: 

12V DC/150mA ; 

Optional: 

12V DC/ 24V AC

 

Power Consumption 

2.0W 

1.8W 

Operation Temperature

-10°C ~+50°C 

Storage Temperature 

-20°C ~ +60°C 

Storage Humidity 

Maximum 85%RH 

Weight 

12V DC: 300g ; 12V DC/24V AC:370g 

FEATURES 

CAUTIONS 

Dimensions 

118(Ø) × 88(H) mm 

 

 

DIMENSION

 

 

 

 

Reviews: