Copyright © 2010. All Rights Reserved.
www.okinausa.com 1 REV012011-V05
SEMT-7680
680 TVL
SEMT-7610
610 TVL
Day & Night Box Camera
Effio-E with ICR
Quick Setup Guide
PACKAGE CONTENTS
SEMT-7680
1/3" Digital Wide Dynamic Color Camera
Sony Exview CCD, Sony Effio-E DSP
Color: 610 TVL, B/W: 630 TVL
Color: 0.03 Lux @ F1.0, B/W: 0.005 Lux @ F1.0
SEMT-7610
1/3" Digital Wide Dynamic Color Camera
Sony Super HAD CCD II, Sony Effio-E DSP
Color: 680 TVL, B/W: 700 TVL
Color: 0.05 Lux @ F1.0, B/W: 0.01 Lux @ F1.0
Mechanical IR Cut Filter (ICR)
Multi-Language OSD Control
ATR Digital Powerful 128x WDR (52dB)
Anti-Headlight (HLC)
2D Noise Reduction
High Contrast Images
Ideal for Backlight Environments
Mosaic Privacy Mask
Advanced Motion Detection Function
Picture Quality Adjustable (Contrast/Sharpness/Hue/Gain)
12V DC / 24V AC, 3.5W
FEATURES
One (1) SEMT-7680 or SEMT-7610 camera
One (1) DC Connector
One (1) CS Mount Ring
One
(1)
DC
Plug
One
(1)
Allen
Wrench
One (1) Warning Sign Sticker
One (1) Quick Setup Guide
One (1) CD with User Manual
*
For any returns, please include all components listed above with
original packaging in
Resalable Condition
.
Absolutely No Returns
will
be accepted if any components are missing/damaged or if any cable is
cut or tampered with.
DIMENSIONS (Unit: mm)
DESCRIPTION OF CAMERA PARTS
** Please refer to User Manual CD for detailed information **
①
Lens Mount
This mount is used to install a CS-mount lens. CS-adaptor ring is
required when using a C mount lens.
②
Camera Mounting Screw Holes
Screw hold for mounting the camera.
③
Mount Adaptor
The adaptor can be attached onto the top or the bottom of the unit.
④
Auto Iris Lens Connector (4-pin type)
The lens connector supplies the auto-iris lens (not supplied) with DC
control signal.
⑤
Video Connector
Video can be outputted via this BNC connector (75
Ω
).
⑥
Iris Mode Selection
Select DC or VIDEO mode according to the lens.
⑦
OSD Control Buttons
ENTER button
UP & DOWN buttons
LEFT & RIGHT buttons
⑧
Secondary Video Connector
Video can be outputted via this BNC connector (75
Ω
).
⑨
Power Input Indicator Light
When the camera is connected to a power source, the indicator light
will be on.
⑩
Power Input Terminal
Connect the power input of 12V DC or 12V DC / 24V AC.