OLIGHT S35 BATON, Operator'S Manual

Package Contents

.1.

Olight S series focus on high end household LED flashlight 
market, it's been equipped with CREE XM-L LED and 
powered by multiple AA batteries. They are featured with 
practice, reliability and integration. S series renounced the 
traditional screw-thread design but choose the integration 
of head and body as well as the tail cap and battery carrier, 
and use high reliable electronic switch instead of traditional 
mechanical switch, the standby current has already been 
decreased as low as 8uA. S series also lead in the low-
voltage indication of non-rechargeable batteries and 
locking status for the first time all over the world! Here we 
introduce S35 BATON and S65 BATON, which work with 
3pcs AA and 6pcs AA batteries individually in order to meet 
the users' different requirements of high brightness and 
long runtime, S series can be the first choice of high end 
household models!

Specifications

.2.

1. World-class super bright Cree XM-L LED

2. S35: Max 380 lumens(OTF), 180meters long throw

   S65: Max 700 lumens(OTF), 250meters long throw 

3. S35:Max almost 240 hours long runtime

    S65:Max almost 360 hours long runtime

4. Three adjustable brightness levels and strobe.

5. Anti battery polarity reverse protection

6. With side switch, press the button and silicon cap.

7. Integrated design

8. Low voltage indication

9. Highly water resistant to IPX-8

10. Mil-spec: MIL-STD-810F

11. Mini orange peel reflector offers perfect beam and long throw

12. Super Strong anti reflex coating lens, 96% effective

      transmission

13. Excellent tridimensional heat dissipation ability

14. S65: Intelligent temperature control system to prevent 

      flashlights  overheated

Olight Technology Co., Limited
www.olightworld.com 
Tel: +86-755-3351 8606
Fax: +86-755-3380 0207
Email:

service@olightworld.com

TM

No               Name                  No                Name

1                    
2              

4            

3              

5               
6     

.5.

.6.

Operation

Power on/off the light
To power on the light, click power switch.
To shut off the output, click power switch.

Switch output mode
Under on state, press and hold power switch, the output
switches between high level , medium level and low level, choose 
expected level then release the switch.
To enter into strobe mode, double click power switch under on 
state.
Under strobe mode, click power switch will shut off the
output, but press and hold power switch will enter into always level.

Lock and unlock
To lock the light, under on sate, press and hold power switch
until the output shut off automatically. Under lock state,

to unlock the light, quickly click the power switch 3 times
within 1 second.

.8.

Operation Introduction

As to those exceed 24 months of the purchase date, Olight will 
still provide with warranty service.  Labor is free but cost of 
parts will be charged. This warranty covers parts and labor 
only as specified above. Freight and transit costs are the 
responsibility of the user/owner, not the factory or dealer.                                    

TM

Olight  warrants its products to be free from defects in 
materials and workmanship. Within 30 days of receipt, 
any defective lights will be offered repair or replacement

TM 

 by the retailer where the product was purchased. Olight will 
repair or replace, at its option and without charge, any product 
or part which is found to be defective under normal use and 
service within 24 months counting from the date of purchasing 
with proof of purchase, Such repair or replacement shall be the 
purchaser’s sole and exclusive remedy under this warranty, 
This warranty does not cover normal maintenance and service 
and does not apply to any products or parts which have been 
subject to modification, misuse, negligence, accident, 

TM

improper maintenance or repair by anyone other than  Olight .

There is no other express warranty. Olight hereby disclaims 
any and all implied warranties, including but not limited to 
fitness for a particular purpose. 
Olight shall not be liable for incidental, consequential, 
or special damages arising out of or connection with 
product use or performance.

size:105*147

TM

Operator

'

s Manual

Tactical LED Flashlight

S35 BATON/ S65 BATON

Low  voltage  indication:  low  voltage  indicator  lights  as 
sparkle,  two  times  for  one  second  when  supply  voltage  is 
lower  than  3V.    Different  grade,  different  time  for  indication.   
After low voltage indication, the flashlight can still work for a 
long  time,  and  almost  no  difference  with  that  of  before  low 
voltage, except for top.
Note: low voltage is only a reference to power, not for a basis 
of changing battery.

Lock down:  the indicator lights up for a second to show you 
lock-down state after one press. 

Notice

3X AA batteries, 1 X key-ring, 
1 X white diffuser, 1 X holster.

S35 BATON

Size(mm)

Weight

(without batteries)(g)

Reflector

Body material

Color

Glass 

Switch 

Physical character

Black

 Aluminum alloy body

 with type-III hard anodization

Orange peel surface aluminum alloy

Steel hardened glass

Side  button switch

S65 BATON

173

219

128*39.7

180*39.7

S35 BATON

Photoelectric

characteristic

S65 BATON

LED

Batteries

 LED Emit  Flux

Low

Medium

High

Strobe

Max Beam Distance

Warning low voltage

Memory

Active thermal

management(ATM)

CREE XM-L LED

CREE XM-L LED

3 x AA

6 x AA

Three strobe Three 

+strobe

levels

460lm

950lm

380lm/1.5h

120lm/3.5h

20lm/240h

700lm/1.3h

200lm/5.3h

20lm/360h

 10hz 380lm/3h

 10hz 700lm/3h

 180 meters

 250 meters

 8100 cd

 15600 cd

+

 3.0    0.1v

+

 3.0    0.1v

0.008mA

Idle current

Standard: White Diffuser
Optional: Red ,Green,Blue Filter 

Holster

S35:3 x AA Batteries
S65:6 x AA Batteries

Optional Accessories

 Optional Accessories

Features

Specifications

Operation Introduction

1

3

4

5

6

+

-

.7.

.3.

.4.

6 X AA batteries, 1 X key-ring, 
1 X white diffuser, 1 X holster.

S35 BATON

S65 BATON

0.008mA

3

5 B

AT

O

N

HO

T SU

RFA

CE

6

5 B

AT

O

N

2.

3.

4.

1.

2.

Glass

Stainless Flat shield

Head and Body

2

Power switch

Battery  Carrier

lanyard hole

 Mode

Beam intensity

key-ring

Operation

Unscrew the tailcap, then insert AA batteries into battery carrier, the 
positive  of  battery  towards  the  copper  plate  of  carrier,  and  the 
negative  towards  the  spring  of  carrier.  After  doing  that,  insert  the 
battery carrier into flashlight tube, tightly screw the tailcap.

Install batteries

1.

1 X key-ring,