background image

8x8 Pine 

SpaceMaker

Assembly Manual

Version 5 

Oct 21, 2010

Thank you for purchasing
an 8x8 Pine SpaceMaker 
Shed. (with Western Red Cedar 
Trim Accents)

Please take the time to 
identify all the parts 
prior to assembly.  

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential
use, on level ground. Please follow the 
instruction manual when building your 
shed and retain the manual for future 
maintenance purposes.

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s). 
-if the product is elevated, any structural and building code requirements are solely the customer's 
responsibility, and should be abided by. 
-in high or gusty wind conditions it is advisable to keep the structure securely grounded. 
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight. 

Customer agrees to hold Outdoor Living Today Partnership and any of our Authorized Dealers
free from any liability for improper installation, maintenance and repair.

In the event of a missing or broken piece, simply call the Outdoor Living Today
Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your 
purchase. It is our commitment to you to courier replacement parts, free of charge, 
within 10 business days of this notification. Replacement parts will not be 
provided free of charge after the 30 day grace period. 

Toll Free 1-888-658-1658             www.outdoorlivingtoday.com          sales@outdoorlivingtoday.com

Page 1

Summary of Contents for 8x8 Pine SpaceMaker




























Reviews: