800-525-0954 | www.olympuslock.com
info@olympuslock.com
Copyright © 2020 Olympus Lock, Inc.
INSTALLATION
INSTRUCTIONS
IC Cam Lock
CR25LM/DM
Typical Installation
Included Accessories:
1 plastic thumbturn
1 720-PL3 anti-rotation plate
and screws
1 720-3-1 short inverted cam
1 720-3-2 long vertical cam
1 720-CDLM
1 720-CDDM
1 720-KR
Lock diameter is 1-1/8.” Drilled hole should be
slightly larger.
720-PL3
anti-rotation plate
Installation/handing for
key-retaining option
LH
RH
Left-hand (LH)
Hinged on left
Right-hand (RH)
Hinged on right
VH
IH
IMPORTANT:
It is highly recommended
that you install the
prong driver
and
lock
cylinder
into the lock
body and cycle to the
locked position before
assembling cam, cam
shifter and stop pin onto
the back of the lock.
720-3-1
for inverted function
720-3-2
inbent cam for vertical
function (bottom-pin style)
Included
Cams
720-CDLM
lost motion cam shifter
(standard function, non-
key-retaining)
720-CDDM
(A Side)
key-retaining door
cam shifter
720-KR
key-retaining
drawer cam shifter
720-CDDM
(B Side)
key-retaining door
cam shifter
1
2
3
3
Optional cams
Note: use of standard
and/or optional cams depends on your
specific application.
