background image

38 Tesla, Irvine, CA 92618 USA

Phone: (949) 250-6510

iConverter

®

1-Module Redundant Power Chassis

User Manual

General and Copyright Notice

This publication is protected by U.S. and international copyright laws. All rights reserved. 

The whole or any part of this publication may not be reproduced, stored in a retrieval 

system, translated, transcribed, or transmitted, in any form, or by any means, manual, 

electric, electronic, electromagnetic, mechanical, chemical, optical or otherwise, without 

prior explicit written permission of Omnitron Systems Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPoint

TM

FlexSwitch

TM

, HybridNID

®

, iConverter

®

, miConverter

TM

, NetOutlook

®

, OmniLight

®

OmniConverter

®

, RuggedNet

®

, Omnitron Systems Technology, Inc.

TM

, OST

TM

 and the 

Omnitron logo. 
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice. 

Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.

Warranty

This network product and the included AC/DC power adapter are warranted to the 

original purchaser (Buyer) against defects in material and workmanship for a period of 

two (2) years from the date of shipment. The warranty for the network product can be 

extended to lifetime by registering the product at www.omnitron-systems.com/support 

within ninety (90) days from the date of shipment. During the warranty period, Omnitron 

will, at its option, repair or replace a product which is proven to be defective with the 

same product or with a product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility, at 

Buyer’s expense. Omnitron will pay the shipping charge to return the product to Buyer’s 

designated US address using Omnitron’s standard shipping method.

Limitation of Warranty

The foregoing warranty shall not apply to product malfunctions resulting from improper 

or inadequate use and/or maintenance of the equipment by Buyer, Buyer-supplied 

equipment,  Buyer-supplied  interfacing,  unauthorized  modifications  or  tampering 

with equipment (including removal of equipment cover by personnel not specifically 

authorized and certified by Omnitron), or misuse, or operating outside the environmental 

specification of the product (including but not limited to voltage, ambient temperature, 

radiation, unusual dust, etc.), or improper site preparation or maintenance.

No other warranty is expressed or implied. Omnitron specifically disclaims the implied 

warranties of merchantability and fitness for any particular purpose.

The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron 

shall not be liable for any direct, indirect, special, incidental, or consequential damages, 

whether based on contract, tort, or any legal theory.

Environmental Notices

The equipment covered by this manual must be disposed of or recycled in accordance 

with the Waste Electrical and Electronic Equipment Directive (WEEE Directive) of 

the European Community directive 2012/19/EU on waste electrical and electronic 

equipment (WEEE) which, together with the RoHS Directive 2015/863/EU, for electrical 

and electronic equipment sold in the EU after July 2019. Such disposal must follow 

national legislation for IT and Telecommunication equipment in accordance with the 

Page 2

Summary of Contents for iConverter 8245-11pt









Reviews: