background image

1

Safety-door Switch

D4DS

Compact Safety Switch Saves Space
and is Ideal for a Variety of Doors

Positive opening mechanism 

 and double

insulation   approved by TÜV and BIA.

Five-direction Operation Key.

Approved by UL and CSA standards.

Switzerland’s SUVA approval pending.

Degree of protection: IP65 (EN60529), Type 4
(UL/CSA) (indoor use only).

Safety Standards:

Conformity:
Machinery directive
Low voltage directive
EN50047
EN1088

 Approved Standards

Agency

Standard

File No.

TÜV Rheinland

EN60947-5-1

R9551708

UL (see note)

UL508
CSA C22.2 No.14

E76675

BIA

GS-ET-15

1-conduit: 9509915
2-conduit: 9509913

SUVA

SUVA

1-conduit: 6010Z
2-conduit: 6011Z

Note:

CSA C22.2 No. 14 compliance was verified and approved

by UL (Marked with 

).

E

u

Ordering Information

 Model Number Legend

Limit Switch

1.

Conduit
1:

Pg13.5 (1-conduit)

2:

G1/2 (1-conduit)

3:

1/2-14NPT (1-conduit)

5:

Pg13.5 (2-conduit)

6:

G1/2 (2-conduit)

2.

Built-in Switch
5:

1NC/1NO (Slow-action)

A:

2NC (Slow-action)

3.

Head Mounting Direction

F:

Four mounting directions pos-
sible (Front-side mounting at
shipping)

1.

Operation Key Type
1:

Horizontal mounting

2:

Vertical mounting

3:

Horizontal-adjustable vertical
mounting

5:

Vertical/Horizontal-adjustable
vertical mounting

D4DS-K

j

1

Operation Key

D4DS-

jjj

S

1

2

3

Note:

An order for the head part or the switch part alone cannot be accepted.
The Operation Key is sold separately.

Summary of Contents for D4DS












Reviews: