ESPAÑOL
B – SET UP BY CODE
HOW TO SET UP YOUR REMOTE
If your brand is not listed in section A, you can set up your device by trying codes individually.
To do this:
1.
Turn your device on (not on standby).
2.
Locate the brand of your device in the code list (pages 146-157). Codes
are listed by Device Type and Brand.
3.
Hold down MAGIC until the LED under the device blinks twice. The LED
under the current device will stay lit.
4.
Press the MODE key repeatedly until the LED for the device you want to
set up is lit.
5.
Enter the first 4 digit code listed for your brand (e.g. 0556 for a Bennett
TV).
6.
The LED will blink twice and go out.
7.
Now aim the remote towards your device and press the POWER key.
8.
If the device turns off, your remote is ready to use. If not, repeat steps 3-7 with the next code
in the list.
•
Some codes are quite similar. If you find that one or more keys do not operate as you expect,
try again from step 3 with the next code in the list.
ESPAÑOL
URC7145
SIMPLE SET UP GUIDE
ENGLISH
Open the battery door.
Insert 2 AAA batteries.
ENGLISH
KEY TABLE
Thank you for purchasing the One For All 4.
Now you can control all of your Audio/Video
devices with a single remote, while enjoying extra features such as the ability to combine devices
in a single Activity Mode, sending multiple commands on a single key press (macros) and being
able to customise the remote control to your exact requirements.
To get started with your new remote, the first step is to set it up to control all of your
Home Cinema devices.
HOW TO SET UP YOUR REMOTE
A – SIMPLESET
SimpleSet is a quick and easy way of setting up the remote to control the most popular brands of
each device type with only a few key presses, typically in under a minute per device. The first step
is to select which device you are going to set up. The following is a list of Device Modes on the
remote control, and the Device types that can be set up on that mode:
Device Mode
Type of device
TV
TV, HDTV, LED, LCD, Plasma, Projector
STB
Set Top Box, Satellite Receiver, Cable Converter,
Freeview, DVB-T, IPTV
BLU
Blu-ray, DVD, DVD Home Cinema
AUD
Audio, AV Receiver, Amplifier, Tuner, Sound Bar
For each Device type, there is a list of the top brands, each with a number assigned to it,
for example 6 for a Samsung TV. Locate your device and brand in the list that follows:
TV
1
Alba / Bush / Goodmans
2
Grundig
3
LG
4
Panasonic
5
Philips
6
Samsung
7
Sharp
8
Sony
9
TCL / Thomson
0
Toshiba
STB:
Sat, Cable, DVB-T
1
BSkyB / Sky Ireland / Orange
2
Canal+ / CanalSat /
3
Dream Multimedia / TechniSat
4
DStv / Multichoice / Foxtel / Sky New
Zealand
5
Freebox / Tricolor TV / Vu+
6
Humax
7
Samsung
8
Sky Italia / SFR / Neuf TV
9
Sky Deutschland / Österreich /
T-Home / Deutsche Telekom
0
UPC / Cablecom / UPC Direct /
Virgin Media
MAGIC:
Used to set up
your remote
+/-:
Channel Up and Down
MENU:
Show the menu of
the current device
EXIT:
Exit from the Menu of
the current device
AV:
Select the input on
the current device
INFO:
Displays info of
current playback
POWER:
Power on/off
WATCH MOVIE:
Combines 2 or
more devices into one mode
for movie viewing
PP:
Previous Program, Last
Channel
3D:
Access 3D functionality if
applicable
Red, Green, Yellow, Blue –
Fastext/Quick access keys
PLAYBACK:
Playback keys
for the current device
MODE:
Scroll through
the devices your remote is
set up to control
WATCH TV:
Combines 2 or
more devices into one mode
for TV viewing
FAV:
Favourite Channels
GUIDE:
TV Guide, EPG
SMART:
Access internet
and Smart features
of your TV or internet-
connected device
BACK:
Back one step in
the Menu of the current device
VOL:
Volume Up, Down and
Mute
16:9:
Adjust the Aspect
Ratio (screen size) of your TV
or Set Top Box
LIST:
Displays a list of
recorded programmes
A – SIMPLESET
HOW TO SET UP YOUR REMOTE
BLU:
Blu-ray, DVD
1
Denon, Harman/Kardon
2
JVC
3
LG
4
Panasonic
5
Philips
6
Pioneer
7
Samsung
8
Sony
9
Toshiba
0
Yamaha
To set up your device
1.
Turn on your device (not on standby) and point the OFA remote towards it.
2.
Hold down MAGIC until the LED under the device blinks twice. The LED
under the current device will stay lit.
3.
Press the MODE key repeatedly until the LED for the device you want to
set up is lit.
4.
Hold down the digit for your brand and device as listed above (e.g. 6 for
Samsung TV).
5.
The remote will send Power every 3 seconds until your device switches off.
6.
As soon as your device switches off, release the digit.
7.
The LED will blink twice and go out. The remote should now operate your device.
•
If you find one or more keys do not work as you expect, start again at step 1 – the remote will
start with the next code in the memory.
AUD:
AV Receiver, Amp, Tuner, Sound Bar
1
Denon
2
Harman/Kardon / JBL
3
LG / JVC
4
Onkyo
5
Panasonic / Technics
6
Philips / Marantz
7
Pioneer
8
Samsung
9
Sony
0
Yamaha
