Optic USB Base Station
(Part # BASE-U-4)
Inside this package:
•
Optic USB Base Station
•
Set of couplers:
- For UA Pendant (COUPLER2-A)
- For U20 Water Level (COUPLER2-B)
- For U22 Water Temp Pro v2 (COUPLER2-C)
- For UTBI TidbiT v2 (COUPLER2-D)
- For U23 HOBO Pro v2 (COUPLER2-E)
Doc # 10655-D, MAN-BASE-U-4
Onset Computer Corporation
Thank you for purchasing an Onset Optic USB Base Station.
With proper care, it will give you years of reliable service.
Overview
The Optic USB Base Station allows communication between the host computer and HOBO
®
optic loggers. The
base station uses infrared light to transfer data, which allows loggers to be completely sealed and waterproof. The
Optic USB Base Station converts the USB communication protocol into an infrared protocol used by the optic USB
loggers.
A coupler is required to connect the logger to the base station. Refer to the documentation that came with your
logger for the part number of the correct coupler.
Support Loggers
This model of the Optic USB Base Station supports HOBO U-Series loggers with an optic USB interface. Contact
your Onset Authorized dealer or the Onset website (http://www.onsetcomp.com) for more information about
compatible loggers and couplers.