background image

QUICK START GUIDE

This quick start guide provides 

only basic information on the 

camera’s settings and operation for 

initial installation. Please read the 

user manual for optimal camera 

confi gurations.

Scan the QR code or go to

openeye.net/downloads

Find the latest product 

documentation and software.

Copyright ©2021 OpenEye. 

All Rights Reserved. Information contained in this 

document is subject to change without prior notice. 

OpenEye does its best to provide accurate information but 

cannot be held responsible for typos or mistakes.

Liberty Lake, WA, USA

509.232.5261

openeye.net

CONNECTIONS

Waterproof Cable

1

1

Thread lock cap

Thread lock cap

44

Rubber “O” ring

Rubber “O” ring

22

Rubber plug

Rubber plug

55

Camera cable

Camera cable

33

RJ45 enclosure

RJ45 enclosure

5

4

3

1

2

1

2

1

1

RJ-45

RJ-45

For network and PoE connections

For network and PoE connections

22

Power (12vDC)*

Power (12vDC)* Power connection

Power connection

*12vDC power input port should be plugged when not in use.

2MP Outdoor IP Turret

OE-C1016T2

37682AA

Reset Button

Reset Button

To restore the camera to factory

To restore the camera to factory

defaults:

defaults:

1. 

1.  Disconnect power for 30 

Disconnect power for 30 

seconds.

seconds.

2. 

2.  Reconnect power and wait 30 

Reconnect power and wait 30 

seconds.

seconds.

3. 

3.  Press and hold the reset 

Press and hold the reset 

      button for 20 seconds.

      button for 20 seconds.

MicroSD Card Slot

MicroSD Card Slot

Supports up to 512GB microSD 

Supports up to 512GB microSD 

card for Edge storage.

card for Edge storage.

Do not add or remove the 

Do not add or remove the 

microSD card when the camera 

microSD card when the camera 

is powered on.

is powered on.

Reviews: