1
E301471#1
O p e r a t i n g I n s t r u c t i o n s
A u t o m a t i c G l u e G u n
3 0 1 . 4 7 1
Operating instructions
1. Plug your glue in a power outlet.
2. Insert a glue stick into the tool. Two glue sticks are required when the gun is used for the first time.
3. Wait 5 minutes for the glue to attain correct temperature.
4. Press trigger to let the glue out.
5. Replace glue sticks as needed.
6. Unplug your glue gun if you do not expect to use it shortly.
Safety precautions
1. Before plugging the gun in the power outlet, install proper stand.
2. Skin can be burned by hot glue. Avoid any contact with hot glue.
3. Always wear safety goggles.
4. Never use liquids to let your glue gun cool down. Use natural ventilation only.
5. Always make use of stand to assure adequate ventilation of the tool.
6. Always keep your work place clean.
7. Do not work in dangerousenvironments. Do not use your glue gun in wet areas. Do not expose tool to rain.
Always keep the working surfaces well illuminated. Do not use the gun near flammable materials.
8. Protect yourselves from electric shocks. Avoid touching grounded parts, like tubes, etc...
9. Check electric extension cables regularly.
10. Keep the gun away from children. Do not let other people, except the operator, touch the tool. While wor-
king, keep people around you at safety distance from work surfaces.
11. Never unplug the toolfrom power outlet by pulling the cord.
12. While working, always maintain the correct position. Do not lean forward.
13. After working, always unplug the tool from power outlet. To restart operation, it is sufficient to plug in the
tool again.
14. Avoid undesired glue jets. Do not keep your finger on trigger when moving th gun around.
15. Never use your glue gun for outdoor applications. The gun has not been designed for such applications.
16. Never leave the glue gun unattended.
18. If the supply cord of this appliance is damaged, it must only be replaced by a repair shop appointed by the
manufacturer, because special purpose tools are required.