background image

1

GB

INTRODUCTION

Congratulations for purchase of the Weather Forecast RF Wall
Clock with Remote Thermometer (JMR838WFA).

The JMR838WFA is designed to receive RF signals generated by
the US Atomic Clock, one of the world's most accurate timekeepers.
Each time the JMR838WFA receives this signal, the current time
and date is synchronized with the US Atomic Clock.

the JMR838WFA also displays outdoor and indoor temperature
and uses barometric information to indicate weather forecasts
and atmospheric pressure trends.

Included in this package is a remote thermo-sensor. Place the
thermo-sensor in a sheltered outdoor location within a 30 meters
(100 feet) radius of the main unit and it will transmit outdoor
temperature readings to the JMR838WFA.

Other features include a daily crescendo alarm with an eight-
minute snooze function and an extra-large LCD display.

DESCRIPTION OF PARTS

A

MAIN UNIT

A1

Extra-large liquid crystal display (LCD)
• Displays the time, date and weekday
• Alarm status, and alarm-set time
• Weather forecast and pressure trend
• In/outdoor temperatures in ºF

A2

[  

 ] Radio-reception signal

 Indicates the strength of RF signal reception

A3

 ] Alarm-on icon

Appears when the alarm is activated

A4

 ] Alarm icon

Appears when the alarm time is displayed

A5

[         ] Battery-low indicator
Apprears when the battery power is low

A6

[         ] Battery-low indicator (remote sensor)
Apprears when the remote-sensor battery power is low

A7

Trend indicator
Indicates the trend of barometric pressure changes

A8

Weather-forecast icons
Displays Weather forecasts as sunny, partly cloudy,
cloudy, rainy or snow

WEATHER FORECAST RF WALL CLOCK

WITH ROMOTE THERMOMETER

JMR838WFA

Instruction Manual

A9

 (( SNOOZE )) 

 ]  button

Activates the snooze function

A10 [

 CLOCK 

] button

Toggles between “seconds” and “weekday” displays or
activates the calendar-clock setting mode

A11 [  

  ] UP button

Increases the value of a setting

A12 [ 

ALARM 

] button

Displays the alarm-time or sets the alarm time and status

A13 [

 ZONE 

] button

Sequences through the 4 US time-zone choices of Pacific,
Mountain, Central and Eastern

Summary of Contents for JMR838WFA








Reviews: