INTRODUCTION
Thank you for purchasing the RCC Clock . Please read carefully through the following
information and keep these instructions, in case you need to refer to them in the future. If you
pass the product on to someone else, please also include these instructions.
The Radio-Controlled Clock (RCC Clock) displays:
- indoor temperature
- date / time / weekday
- alarm
The RCC Clock is unsuitable for commercial use in weather forecasting or in temperature data
measurement.
PACKAGE CONTENTS
Main unit
AAA batteries
for main unit x 2
OVERVIEW
1
：
Press to activate the snooze functon,backlight .
2
：
In Date mode, press to turn on/off zone. In Alarm time
mode, press to turn on/off alarm. Press and hold to enter time
and date setting.
3
：
Press to show alarm time of Alarm 1-5 and Alarm 6-7.
Press and hold to enter alarm setting.
4
：
Press to switch between Temperature and Week Day
display. Press and hold to start RCC signal receiving. In
setting mode, press to increase one unit, press and hold
to increase rapidly.
5: Press to switch between Date and the nearest coming
Alarm time.In setting mode, press to decrease one unit,
press and hold to decrease rapidly.
6
：
Battery compartment. Slide down to open.
LCD DISPLAY
1: Time Display
2: Date display or Alarm time display
3: Temperature display or Week Day display
RCC signal received
Alarm ON
DST ON
Snooze Activated
Low battery indicator
Temperature mode
GETTING STARTED
INSERT BATTERIES
1: Remove the battery door from the back
2: Insert 2 R03 (AAA)/ 1.5V batteries. Please ensure the polarities (+/-) of the batteries
match upon installation.
3: Reattach the battery door.
NOTE
: Replace batteries when displays, or when the display is dim.
CLOCK
CLOCK RECEPTION
1: Replace batteries or press button will initiate RCC receiving.
2: RCC receiving can be worked in both Date Mode and Alarm Mode.
3: The receiving process duration is 7 minutes.
4: During receiving process, the RCC signal logo flashes.
5: During receiving process, press button to quit receiving, press other buttons
can work normally.
6: If process is successful, completed RCC logo will be shown in display. If it fails within
7 minutes, RCC setting will be quit automatically.
7: RCC receiving will automatically start at 2:03, 3:03, 4:03 , 5:03 every night. Auto
receiving function will cease if it is successful.
Front
back
ALARM
SETTING/ADJUSTING ALARM TIME
1. Press and hold button, enter alarm setting
2. Sequence of setting: weekday hour
weekday minute
weekend hour
weekend
minute
exit
3. During setting, the setting parameter will flash.
4. Press button to confirm setting and enter to next parameter
5. Press button once, the figure will increase 1 unit. Press and hold the button, the figures
will increase rapidly.
6. Press button once, the figure will decrease 1 unit. Press and hold the button, the
figures will decrease rapidly.
7. Press button to turn on/off alarm
8. Alarm will automatic turn on when alarm setting finish.
9. If there is no action in 20 seconds, the setting will be saved and will exit the setting mode.
TURN ON/OFF ALARM
1. When it is displaying the nearest coming Alarm time, press button once to turn on/off that
alarm. (1-5) or (6-7) will flash to indicate which alarm displaying.
2. Press button once to switch to alarm mode. Monday to Friday alarm time will be shown and
(1-5) will flash.
3. Press button once to turn on/off Monday to Friday alarm
4. Press button again to show Saturday to Sunday alarm time. (6-7) will flash.
5. Press button once to turn on/off Saturday to Sunday alarm.
OPERATION
1. At the set time, alarm signal rings.
2. During alarm rings, press any keys to end the alarm. Or press button to delay the alarm for
8 minutes.
3. If do not press any button to end the alarm, it will turn off automatically after 5 minutes.
4. Alarm will be start again at next alarm time, unless switch off the alarm function in alarm mode.
PRECAUTIONS
Hazards for children
Batteries can be life-endangering if swallowed. Please keep the RCC Clock and batteries
out of reach of children. If a battery has been swallowed, please seek medical assistance
immediately.
Keep children away from packaging material and the small parts in the scope of delivery.
Suffocation hazard if swallowed.
I
njury hazard
Caution: Explosion hazard with improper handling of batteries. Batteries must not be charged,
reactivated with other means, dismantled, thrown into fire or short-circuited.
Avoid contact with skin, eyes and mucous membranes. When coming into contact with battery
acid, immediately rinse the affected areas with plenty of clear water and immediately contact a
physician.
Caution – property damage
Protect the RCC Clock from dust, impact, extreme temperatures and direct sunshine. Also
protect the RCC Clock from moisture. Exclusively position Projection Clock in a dry,
enclosed space.
Remove the batteries from the RCC Clock, if they become depleted or if you are not using
the RCC Clock for a longer period of time.
Different model receives different RCC signal:
Region Signal
EU
DCF
UK
MSF
SET THE CLOCK MANUALLY
1. Press and hold button, enter time and date setting
2. Sequence of setting: Week Day Language
12/24 Hr
Year (2000 – 2099)
Date format
Month
Date
Hour Minute
Zone
℃
/
℉
exit
3. During setting, the setting parameter will flash.
4. Press button to confirm setting and enter to next parameter
5. Press button once, the figure will increase 1 unit (when setting minute, second will reset to
0). Press and hold the button, the figures will increase rapidly.
6. Press button once, the figure will decrease 1 unit (when setting minute, second will reset to
0). Press and hold the button, the figures will decrease rapidly.
7.If there is no action in 20 seconds, the setting will be saved and will exit the setting mode.
Five languages Week Day display: GER, ENG, FRE, ITA, DUT.
Symbol Monday Tuesday Wednesday Thursday Friday Saturday Sunday
German GER MON DIE MIT DON FRE
SAM SON
English
ENG MON TUE WED THU FRI
SAT SUN
France
FRE LUN MAR MER JEU VEN
SAM DIM
Italian
ITA LUN MAR MER GIO VEN
SAB DOM
Dutch
DUT MAA DIN WOE DON VRI
ZAI ZON
Do not expose the batteries to any extreme conditions by e.g. placing them on a radiator or
under direct sunlight.
Clean the battery and appliance contacts prior to insertion, if required.
Using same type of batteries. Do not use different types or used and new batteries together.
Do not carry out any changes to the device. Only allow repairs to be carried out by a
professional workshop.
Never use hard, scratching or abrasive detergents or similar, for cleaning the RCC Clock.
This could scratch the surfaces.
SPECIFICATIONS
L x W x H 72 x 25 x 75 mm
Weight (Main unit)
73g (Exclude batteries)
Temperature display range -10
℃
to +50
℃
(14
℉
to 122
℉
)
Accuracy 0
℃
to +40
℃
: +/- 1.5
℃
(+/-3
℉
)
<0
℃
and >+40
℃
: +/- 2
℃
(+/-4
℉
)
Resolution 0.1
℃
(0.2
℉
)
Power
2 x R03 (AAA) 1.5V batteries
NOTE:
When the temperature is lower than -10
℃
(14
℉
), the temperature displays LL.L. When the
temperature is higher than 50
℃
(122
℉
), the temperature displays HH.H.
During alarm rings or RCC receiving process, temperature detection will be stopped.
NOTE:
The technical specifications for this product and the contents of the user manual are subject
to change without notice.
EU-DECLARATION OF CONFORMITY
Disposal:
Guideline 2012/19/EC concerning the handling, collection, recycling and disposal of
electrical and electronic equipment and their components (‘waste electrical and electronic
equipment’, known as WEEE).
The crossed symbol on a rubbish container indicates that the machine or device is not allowed to be
disposed of but it must be handed over to a suitably equipped collection centre for proper recycling
or disposal.
Directives:
We declare that this device has been manufactured in accordance with the applicable rules
and regulations.
