Top
(44)
freedomRail Assembly Instructions
3 Drawer Big OBox
Euroscrews
(6)
(14)
(4)
Connector
Bolts
Hanging
Brackets
Wood
Screws
Bottom
Top
Handles
(3)
Machine Screws
(For Handles)
1 Large Drawer
right Side
3 Drawer Bottoms
2 Small
Drawer
Right
2 Small Drawer Fronts
(1) Large Drawer Front
2 Small
Drawer
Left
(6) Full Extension Drawer Glides
Assembling the 3 Drawer Big OBox
Step 1: Attach Hanging Brackets
Left Side
Right Side
Back Edge
Back Edge
Attach Hanging Brackets to Sides using Euroscrews.
(If using Power Drill, set torque to low setting.)
Step 2: Install Connector Bolts
Top and Bottom
Smaller Holes for
Connector Bolts
Install (4) Connector Bolts into small holes on Top and Bottom Panels.
Step 3: Attach Sides
Cam
Lock
Open
(a) Attach Sides to Bottom. (b) Tighten Cams by turning clockwise until snug.
Step 4: Attach Top
1
Over
Contents of Package
(6)
(1) Large
Drawer Left
Side
(1) Large
Drawer Right
Side
Top
(3) Drawer Bottoms
(2)
Small
Drawer
Left
Sides
(2)
Small
Drawer
Right
Sides
15⁄8"
(2) Small Drawer Fronts
(1) Large Drawer Back
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
(2) Small Drawer Backs
Tools Required
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
(a) Attach Top. (b) Tighten Cams by turning clockwise until snug.
Left Side
Right Side
