TFM-200 Handheld Fiber Microscope Operation instruction
Product description
Eyepiece viewing
Ocus knob
Universal adapter
Two lighting modes
Battery cover
The hand-held fiber optic microscope is a fiber end face
detector. With its high-end optics, it can quickly manually focus
and detect scratches, dirt, and dust on the fiber end face. The
product supports UPC's SC, FC, ST, LC male heads, with good
optical performance and integrated laser safety filter, whether it
is tested on the production line or on-site, allowing your
technicians to quickly find scratches, fiber end dirt.
TFM-200
Fiber Conn
ector Micros
cope
X
200
1
5
2
3
4
Eyepiece: Optical fiber end face viewing window
1
Battery cover: unscrew to put the battery
2
Switch: Two different lighting modes can be selected
3
Adapter interface: including 1.25 mm and 2.5 mm
universal adapters
4
Focus knob: adjust the focus of the knob to check the
clarity of the fiber end face
5
TFM-200
200
X
Fiber Connector Microscope
Toggle "|" to jump to the axial
illumination, toggle "||" to jump
to the side illumination, and
toggle "o" to directly turn off.
TFM-200
200
X
Fiber Connector Microscope
The first step is to unscrew the
battery cover, and the second
step is to put the battery in, and
the battery can be replaced and
used in time.
TFM-200
200
X
Fiber Connector Microscope
Holding the fiber optic
microscope with one hand,
aiming at the eyepiece with a
single eye, you can accurately
check whether the fiber end
face needs to be cleaned.
TFM-200
200
X
Fiber Connector Microscope
Align the eyepiece and
adjust the focal length of the
knob to clearly check the degree
of dirt on the end face.
TFM-200
200
X
Fiber Connector Microscope
Universal adapter
interface, respectively 1.25mm
and 2.5mm is appropriate
interfaces Orchestration.
