1/2
1/2
1/3
1/3
1/3
Quick Reference Card
Before fitting the SYMBIONIC
®
LEG, charge the unit for 2-4 hours to ensure a
full charge.
Turn the SYMBIONIC
®
LEG on
Bench alignment
a) Fit the foot with the selected cover and shoe.
b) Heel height adjustment on bench.
c) Optimize length/alignment of pylon and adaptors.
d) The alignment reference line should pass through a sagittal plane bisection
of the socket, the knee center and the posterior 1/3 of the Flex-Foot.
NOTE: If stability modifications are desired after patient assessment; the
reference line can be shifted up to 5 mm anterior or 5 mm posterior to the knee
center.
Static Alignment
a) Select appropriate heel wedge.
b) Check reference line during static alignment and adjust if required.
c) Optimize knee settings in RHEOLOGIC.
POWER
ON/OFF
2 BEEP = ON
3 BEEP = OFF
Function Hold Sound
SET
HEEL
HEIGHT
x2
1 BEEP = Start
1 BEEP = Move
1 BEEP = Complete
Function Hold Press Sound
CALIBRATION
ON/OFF
2 BEEP =
ON/OFF
x9
Function
Hold Press Sound
d) Ankle calibration.