background image

ROTARY

HAMMER

DRILL KIT

900W

INSTRUCTION MANUAL

SPECIFICATIONS

Motor:  

900W

Impact Rate:  

4,100 bpm

Impact Energy: 

3.0 Joule

No Load Speed: 

850/min

Accessory Fitment: 

SDS+

Drilling Capacities: 

Masonry 26mm

RHD-900

WHAT’S IN THE BOX

Kit Box

Rotary Hammer Drill

Side Handle

Accessories

IN ORDER TO MAKE A CLAIM UNDER THIS 

WARRANTY YOU MUST RETURN THE PRODUCT 

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH 

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO 

RETURNING YOUR PRODUCT FOR WARRANTY 

PLEASE TELEPHONE OUR CUSTOMER SERVICE 

HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 

36 months from the original 

date of purchase

 and it is intended for DIY (Do It Yourself) use only.

  

If a product is defective it will be replaced in accordance with the  
terms of this warranty. Warranty excludes consumable parts, for example: 

carbon brushes, included accessories etc.

WARNING

The following actions will result in the warranty being void.

•   If the tool has been operated on a supply voltage other than that 

specified on the tool.

•   If the tool shows signs of damage or defects caused by or resulting from 

abuse, accidents or alterations.

•   Failure to perform maintenance as set out within the instruction manual.
•   If the tool is disassembled or tampered with in any way.
•  Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE 

HAVE THE MODEL NUMBER AND DATE OF 

PURCHASE AVAILABLE. A CUSTOMER SERVICE 

REPRESENTATIVE WILL TAKE YOUR CALL  

AND ANSWER ANY QUESTIONS YOU MAY  

HAVE RELATING TO THE WARRANTY POLICY  

OR PROCEDURE.

OZITO 

Australia/New Zealand (Head Office)

 

1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition to other rights 
and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You 
are entitled to a replacement or refund for a major failure and for 
compensation for any other reasonably foreseeable loss or damage.  
You are also entitled to have the goods repaired or replaced if the 
goods fail to be of acceptable quality and the failure does not amount 
to a major failure. 
Generally you will be responsible for all costs associated with a claim 
under this warranty, however, where you have suffered any additional 
direct loss as a result of a defective product you may be able to claim 
such expenses by contacting our customer service helpline above.

ozito.com.au

0517

Summary of Contents for RHD-900







Reviews: