Last Update: 30/01/17
1
P.A.
– S.p.A. – EQUIPAGGIAMENTI TECNICI DEL LAVAGGIO
VIA MILANO, 13
– CASELLA POSTALE 115 – 42048 RUBIERA (REGGIO EMILIA) – ITALY
Tel. +39 0522 623611
– Fax. +39 0522 629600 – R.E.A. RE 156319 – R.I. RE11535 – Mecc. RE 013446
C.F. e P. IVA 01035950359
– Cap. Soc. i.v. € 750.000,00 – Codice Identificativo C.E.E. IT 01035950359
ART. 2497
– BIS C.C. DIREZIONE E COORDINAMENTO BENETTI srl R.I. TRIB. DI RE 01480690351
.
Web:
http://www.pa-etl.it
–
E-mail:
info@pa-etl.it
RL60
– Spray gun 60 bar – 6 MPa
Technical manual :
E 122
Guns suitable for use up to 60 bar
– 6 MPa rated pressure centrifugal pumps.
Equipped with closure retarder device.
DN15
TECHNICAL SPECIFICATIONS
P/N
RATED
PRESSURE
bar - MPa
PERMISSIBLE
PRESSURE
bar - MPa
MAX FLOW
RATE
I/min
(1) MAX
TEMPERATURE
°C
INLET
OUTLET
WEIGHT
gr
30.3170.00
60 - 6
65
– 6.5
60
100
G1/2 FF
600
30.3170.90
60 - 6
65
– 6.5
60
100
G1/2 FF
600
(1)
The gun has been designed for continuous use, at a water temperature of 60°C (140°F). It can resist at the max
temperature of 100°C (210°F) for short periods only, as, when the gun shuts off, the heater continues to transmit the heat
to the water, thus increasing both temperature and pressure up to high, dangerous values.
Using the gun at a water temperature higher than 60°C involves for the operator the use of adequate safety devices,
such as gloves, glasses, etc.
Instruction manual, maintenance, installation, spare parts.
For a correct utilization, follow the directions of this manual
Re-print them on the Use and Maintenance booklet of the machine.
n. 12.9122.00
30.3170.00
RL60 w/swivel G1/2 FF
30.3170.90
RL60 w/swivel G1/2 FF
- Covered by shockproof plastic semi-housings.
- Gun with closure retarder to eliminate pressure spikes in
systems without safety valves.
- Built with wide internal passages
- Teflon seat and Sst shutter
- Internal structure in brass and Sst.
- Ergonomic construction.
- Minimum fatigue for trigger opening
- Quick closure version (30.3170.90)