Glueboard Installation
Flypod
®
Please read these instructions carefully and store in a safe
place for future reference.
FLYPOD
TM
As part of the P+L brand of insect control products,
Flypod
®
is
an easy to service and highly effective decorative insect
control unit for use within front of house applications.
Flypod
®
utilises a highly effective UV tube and is designed for use with
a high specification glupac™ glueboard. Patented
technology ensures the user doesn’t come into contact with
caught flies.
Contents of package
- 1 x
Flypod
®
flykiller
- 1 x glupac™ pheromone impregnated glueboard
- 1 x PL-L compact 18W tube
WARNING - THIS APPLIANCE MUST BE EARTHED
INSECT CONTROL PRODUCTS
Flypod
®
utilises a high powered ultra violet tube to attract
flying insects and retains the caught insects on a pheromone
impregnated glueboard for inspection or hygienic disposal.
POSITIONING
THIS UNIT IS FOR INDOOR USE ONLY.
Flypod
®
should ideally be positioned in the darkest place
within the area to be protected and is supplied with a two
meter mains lead. Do not position the unit close to windows,
skylights or other sources of light, or where it may be
obscured by furniture, doors or other obstacles. Ideally,
Flypod
®
units should be visible from every part of the area to
be protected.
INSTALLATION
PRIOR TO INSTALLATION, ENSURE THE POWER SUPPLY OF YOUR
MAINS OUTLET CORRESPONDS TO THAT MARKED ON THE
SPECIFICATION LABEL FOUND ON THE FLYKILLER.
Once correctly positioned on a level, horizontal location, fit
the glupac™ glueboard in position as described in the
glueboard replacement section of this document.
Flypod
®
has a plug fitted to the mains lead and once installed in
position, should be plugged into the nearest mains outlet.
WARNING - THIS APPLIANCE MUST BE EARTHED
USING FLYPOD
®
Flypod
®
should ideally be in operation for 24 hours a day,
ensuring your premises are kept free of flying insects. Insects
are most attracted to
Flypod
®
at night when there is no
competition from daylight or other light sources.
CLEANING
ENSURE THAT THE FLYING INSECT KILLER IS DISCONNECTED
FROM THE MAINS BEFORE CLEANING.
It is recommended that cleaning is carried out regularly when
the glueboard is replaced. Once the glueboard is removed,
the unit should be thoroughly wiped down with a damp
cloth, removing any build up of dirt. Ensure the unit is
completely dry before reconnecting it to the power supply.
GUARANTEE
Flypod
®
has a two year guarantee and if maintained as
recommended in these instructions should continue to work
for many years.* Use of non-approved consumables may
invalidate the guarantee. Ensure genuine glupac™
glueboards are used in conjunction with this product.
*Excludes tubes, glueboards and starters. Does not cover breakdown due to misuse,
incorrect operation or use in an incorrect application.
Decorative Glueboard Insect Control
