1
CONTENT INSPECTION
Once opening up your DS-300 package, the package shall include
the following parts:
INSTALLATION GUIDE
POWER ADAPTER
DS-300 WiMAX MODEM
ETHERNET CABLE
2
GETTING TO KNOW IT
Ethernet
Connector
Reset
Switch
DC Power
Connector
FRONT
BACK
3
INSTALLATION PROCEDURES
ower Adapter
Step 1
Power Up
Plug the Power Adapter into the AC Outlet, and Adapter’s DC tip into
the DS-300 power connector. The Blue POWER LED ( ) shall be ON
when power is turned on .
Wall Socket
DS-300
DC Power
Connector
4
Step 2
Establishing WiMAX Connection
Once powered on, DS-300 will establish the WiMAX service by itself.
The followings will occur in order automatically.
a) Red LED Blinking: Bringing up the wireless link
b) Yellow LED Blinking: User authentication
c) Green LED Blinking: DHCP client negotiation
If all LED lights are still blinking in sequence after 5 minutes, the service
might not be available in the location. Reposition and adjust your
DS-300 placement may help. If the problem still persists, please
contact P1 Customer Support.
Pantone 376c
