background image

AeGIS Satellite Card Reader  (SCR9)

AeGIS Satellite Card Reader  (SCR9)

Installation and Operation Manual

INTRODUCTION

Pach & Company thanks and congratulates you on the purchase of your AeGIS
Satellite Card Reader (SCR9).

The manual is designed to guide you through the proper installation and 
operation of the SCR9. It is important for you to read and follow the manual 
completely.

The AeGIS SCR9 comes with 

two years warranty

, but we are so confident in

our product and our dealer’s ability to install them properly, we will include 
lightning and power surges in our two years warranty if Pach and Company
surge protection (ASP1) is installed with the systems.

SYSTEM DESCRIPTIONS

AeGIS SCR9 utilizes microprocessor technology to provide security as well as
convenience to you. The SCR9 must interface with the AeGIS 9000 Series via
an RS-485. The SCR9 only allows access to tenants or visitors via a 26-bit card
or keyfob code programmed on the AeGIS 9000 Series. There is no audio 
intercom capability.

SYSTEM SPECIFICATIONS

Power Input:

12 VAC/DC 40VA UL Listed Transformer (12 VAC is supplied by Pach & Company) or 12 VDC Power Supply 

(not supplied, power supply output voltage must be 13.5-14.5 VDC).

Current Consumption:350 mA Idle, 475 mA operation.
Emergency Battery:

12 VDC, 4 Ahr rechargeable with 12 VDC power supply (customer supplied). 
Power Supply Output voltage must be 13.5-14.5 VDC.

Communication: 

RS-485 (maximum distance between the AeGIS 9000 Series and the SCR9 not exceeded 4000 Ft., a maximum 32 

of SCR9 can be interfaced with the AeGIS 9000 Series).

Night Light:

14 VAC 200 mA Incandescent Lamp.

Operating Environment:

Temp. 0

0

F to +140

0

F. Relative Humidity 0% to 95%.

Relay Output:

From C Dry Contact 120 VAC 10A/ 24 VDC 10 A/ 250 VAC 7A.

Mounting:

Surface (accessories 

APM1, APM2, APM3, APM4 (indoor application only) and APM5

).

Construction:

16 Gauge Cold Rolled Steel with Brushed Stainless Steel Faceplate.

Dimension

: 6 3/4” (H) x 5 3/4 “ (W), Depth 3 1/2”  to 2 1/2” .

Shipping Weight: 

4 Lbs.

UNPACKING THE SYSTEM

Check the serial number on the printed circuit board and cabinet, they must be matched. If they do not match, please contact Pach &
Company toll free number at 1-888-678-7224. All the items listed below come  with the AeGIS SCR9.

• AeGIS SCR9 Satellite Card Reader.

• 12 VAC Transformer.

• 6-pins, 5-pins and 3-pins terminal connector (inside the system).

• Key sets (2 keys per set).

• Installation and operation manual.

• Warranty Card with system’s serial number.
• Two of 100 Ohm 1/4 Watt resistor.
• Allen wrench, inside the cabinet.

Pach & Company

941 Calle Negocio

Phone: 1-888-678-7224

www.pach-co.com

San Clemente, CA 92673    

Fax: 949-498-6879

Reviews: