background image

Issue 2

1

947178

30 WATT SUSPENDED-RADIAL HORN

(70V) V-5331210

by

PagePac

®

INTRODUCTION

Horn speakers that produce high sound levels are 
capable of covering large noisy areas.
Minimum effective mounting height for a horn is 
critical.  The Suspended-Radial Horn is used 
when 360° sound dispersion pattern is required.

NOTE

: Speaker is provided with 10’ mounting 

chain.  If this is not enough, additional chain must 
be acquired.  See suggested mounting height for 
chain requirements (Figure 2).

SPECIFICATIONS

FEATURES

• High Intelligibility
• Built-in Transformer
• 360° Radial Dispersion

Nominal Specifications

• Frequency Response:  225Hz - 14kHz
• Dispersion:  360°
• 112 dB @ 1W, 1 Meter
• 70 Volt / 30 Watt

Dimensions/Weight

• 13.0"W x 11.8"H (33.0cm x 29.9cm)

10 lbs. (4.5 kg)

Environment

• Temperature: 0 to 40°C (32 to 104°F)
• Humidity: 0 to 85%

INSTALLATION

MOUNTING

Attach the 10 foot metal chain supplied with the 
horn to the post and ring on the horn base (see 
Figure 1).

The device used to attach the chain to the ceiling 
must withstand a 30 pound pull test, or the weight 
specified by local construction or safety codes, 
whichever is greater.

WIRE CONNECTIONS

A clear plastic cover protects the horn screw ter-
minals and provides strain relief for the wires.

1. Remove the two screws from the plastic cover.
2. Set volume adjustment to lowest setting.
3. Connect the (+) 70V side of the speaker wire to 

terminal 2.  Connect the (-) or common side of 
the speaker wire to terminal 1 (see Figure 1).

4. Do not replace the plastic cover until final 

power adjustments have been made.

Reviews: