MAX
®
IN-W
ALL
Install the Power Inlet Faceplate (PIF) behind or near the main equip-
ment rack.
Install the
POWER INLET FACEPLATE (PIF)
Install the
POWER OUTLET FACEPLATE (POF)
Install the
IN-WALL POWER CABLE
The power outlet faceplate (POF) provides additional filtration to eliminate
any radiated noise that may have been picked-up along the way.
The AC Power Cord safely connects to the special twist lock inlet wall
receptacle bringing the power from the power conditioner to the remote
flatscreen or projector. The MIW POWER CORD is engineered to provide
optimum power transfer and shield-out performance robbing noise.
An electrician runs the In-Wall Power Cable between the PIF and the
POF. This premium quality NM LISTED cable provides optimum power
transfer to the display device.
•
50 ft. length
•
12-2 NM Rated with ground
The Ultimate Power Solution for Remote Display
Devices Within a Home Theater System
MIW POWERKIT TL
L505 REV. C 1/06
The Power Specialists Since 1975
®
1690 Corporate Circle, Petaluma, CA 94954
•
800-472-5555 or 707-283-5900
•
Fax - 707-283-5901
•
www.panamax.com
© 2006 Panamax, Inc. Panamax, MAX and the Panamax logo are registered US trademarks of Panamax.
Model:
MIW-POWERKIT-TL
SELL PRICE
US $
299
.95
•
Recessed AC power outlet
•
Noise filtration
•
Removable panel for signal
module (module not included)
•
Includes Retrofit style
J-box & mounting screws
(For New Construction Adaption
see side 2).
(For New Construction Adaption
see side 2).
•
Twistlock Connector
•
National Electrical Code (NEC)
compliant
•
12 ft. length
•
Shielded against EMI/RFI noise
•
12 gauge OFC conductors
•
Recessed AC power
inlet (Twistlock Connector)
•
Removable panel for signal
module (module not included)
•
Includes Retrofit style J- box
and mounting screws.
The enhanced
MAX
®
IN-WALL™ POWERKIT-TL
is a four
component kit designed to provide the ultimate power
solution to remote display devices within a home theater
system. Taking advantage of the already installed EX
Component style power conditioner you can feed safe,
pure power from the main equipment rack to any remote
display device, amplifier or powered subwoofer.
The
MIW-POWERKIT-TL
offers UL approved, code compliant
solutions providing safe, clean AC power and signal with
Isolated Ground Reference (IGR) to remote displays in a dis-
creet manner that meets the customer’s aesthetic expecta-
tions and improves picture and sound quality.
A
B
C
D
Connect the
AC POWER CORD
A
Step 1
Step 2
Step 4
Step 3
B
D
C
