background image

1

2

CQ-VD6503W

English

Safety Information

Warning

Observe the following warnings when using
this unit.

The driver should neither watch the display nor
operate the system while driving.

Watching the display or operating the system will distract
the driver from looking ahead of the vehicle and can cause
accidents. Always stop the vehicle in a safe location and
use the parking brake before watching the display or oper-
ating the system.

Use the proper power supply.

This product is designed for operation with a negative
grounded 12 V DC battery system. Never operate this
product with other battery systems, especially a 24 V DC
battery system.

Keep batteries and insulation film out of reach of
infants.

Batteries and insulation film can be ingested, so keep them
out of the reach of infants. If an infant ingests a battery or
insulation film, please seek immediate medical attention.

Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair
the product yourself. If the product needs to be repaired,
consult your dealer or an authorized Panasonic Service
Center.

Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an
abnormal state (has foreign objects in it, is exposed to
water, is smoking, or smells), turn it off immediately and
consult your dealer.

The remote control unit should not lie about in the
car.

If the remote control unit lies about, it could fall on the
floor while driving, get wedged under the brake pedal, and
lead to a traffic accident.

Refer fuse replacement to qualified service per-
sonnel.

When the fuse blows out, eliminate the cause and have it
replaced with the fuse prescribed for this unit by a qualified
service engineer. Incorrect replacement of the fuse may
lead to smoke, fire, and damage to the product.

Observe the following warnings when
installing.

Disconnect the lead from the negative (–) battery
terminal before installation.

Wiring and installation with the negative (–) battery termi-
nal connected may cause electrical shock and injury due to
a short circuit.
Some cars equipped with the electrical safety system have
specific procedures of battery terminal disconnection.

FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO
THE UNINTENDED ACTIVATION OF THE ELECTRICAL
SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHI-
CLE AND PERSONAL INJURY OR DEATH.

Never use safety-related components for installa-
tion, grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank,
brake, suspension, steering wheel, pedals, airbag, etc.) for
wiring or fixing the product or its accessories.

Installing the product on the air bag cover or in a
location where it interferes with airbag operation
is prohibited.

Check for piping, gasoline tank, electric wiring,
and other items before installing the product.

If you need to open a hole in the vehicle chassis to attach
or wire the product, first check where the wire harness,
gasoline tank, and electric wiring are located. Then open
the hole from outside if possible.

Never install the product in a location where it inter-
feres with your field of vision.

Never have the power cord branched to supply
other equipment with power.

After installation and wiring, you should check the
normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may
cause fire, electrical shock or a traffic accident.

In the case of installation to an airbag-equipping
car, confirm warnings and cautions of the vehicle
manufacturer before installation.

Make sure the leads do not interfere with driving
or getting in and out of the vehicle.

Insulate all exposed wires to prevent short circuit-
ing.

This pictograph intends to alert you to the pres-
ence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in severe injury or
death.

Read the operating instructions for the unit and all other
components of your car audio system carefully before using
the system. They contain instructions about how to use the
system in a safe and effective manner. Panasonic assumes
no responsibility for any problems resulting from failure to
observe the instructions given in this manual.

This manual uses pictographs to show you how to use the
product safely and to alert you to potential dangers resulting
from improper connections and operations. The meanings of
the pictographs are explained below. It is important that you
fully understand the meanings of the pictographs in order to
use this manual and the system properly.

Warning

This pictograph intends to alert you to the pres-
ence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in injury or material dam-
age.

Caution

6503W̲01 eng  06.2.20  2:00 PM  ページ2

Summary of Contents for CQ-VD6503W2



















































Reviews: