background image

OPERATION MANUAL

PACKAGED AIR CONDITIONER

CENTRAL REMOTE CONTROLLER

Model No.

CZ-01ESM11P

Thank you for purchasing Panasonic’s central remote controller.
For proper usage, read this instruction manual carefully before using this unit.
This manual will help you with anything you can not understand or should anything go wrong with the unit during
use.
Keep this manual handy for future reference.

NOTES:

This unit is connected to multiple air conditioners. Keep the installation list showing the configurations together
with this manual.

Wir danken Ihnen für den Kauf der zentralen Fernbedienung von Panasonic.

Lesen Sie bitte diese Anleitung bevor Sie das Gerät in Betrieb setzen durch, um es richtig zu verwenden.
Diese Anleitung wird Ihnen Ungewißheiten aufzuklären oder evtl. auftretende Betriebsstörungen zu korrigieren
helfen.
Bewahren Sie diese Anleitung für spätere Bezungnahme griffbereit auf.

HINWEISE:

Dieses Gerät ist an mehrfache Klimageräte angeschlossen. Bewahren Sie die Installationsliste, aus der die
Konfiguration ersichtlich ist, zusammen mit dieser Anleitung auf.

ENGLISH

ESP

AÑOL

IT

ALIANO

NEDERLANDS

DEUTSCH

FRANÇAIS

En.

Ge.

Before operating this set, please read these instructions completely

Summary of Contents for CZ-01ESM11P


















Reviews: