background image

© Panasonic Corporation 2014 Unauthorized copy-
ing and distribution is a violation of law.

Order Number SD1406X50CE

AC/Rechargeable Beard/Hair Trimmer

Model No.

ER-GB80

Model No.

ER-GB70

Model No.

ER-GB60

Europe
CIS

TABLE OF CONTENTS

PAGE

PAGE

1 Warning

--------------------------------------------------------------

2

2 Specifications

-----------------------------------------------------

2

3 Troubleshooting Guide

-----------------------------------------

3

4 Disassembly and Assembly Instructions

----------------

4

4.1. Disassembly Instuctions --------------------------------- 4
4.2. Assembly Instructions ------------------------------------ 6

5 Wiring Connection Diagram

----------------------------------

9

6 Schematic Diagram

---------------------------------------------

10

7 Exploded View and Replacement Parts List

-----------

11

7.1. Exploded View For ER-GB80 ------------------------- 11
7.2. Replacement Parts List For ER-GB80 --------------12
7.3. Exploded View For ER-GB70 -------------------------13
7.4. Replacement Parts List For ER-GB70 --------------14
7.5. Exploded View For ER-GB60 -------------------------15
7.6. Replacement Parts List For ER-GB60 --------------16

Summary of Contents for ER-GB80

















Reviews: