background image

Quick Reference Guide

Model No.  

KX-T7710

Important Information

When using the KX-T7710, keep the following conditions in mind.

• If there is any problem, unplug the extension line and connect a known working phone.  

If the known working phone operates properly, have the defective phone repaired by a 
specified Panasonic Factory Service Centre.  If the known working phone does not 
operate properly, check the Panasonic KX series Business Telephone System and the 
internal extension wiring.

• Keep the unit away from heating appliances and electrical noise generating devices 

such as fluorescent lamps and motors. 

• The unit should be kept free of dust, moisture and vibration, and should not be exposed 

to direct sunlight.

• Do not use benzine, thinner, or any abrasive powder to clean the cabinet.  Wipe it with a 

soft cloth.

• Do not disassemble this product.  Dangerous electrical shock could result.  The unit 

must only be disassembled and repaired by qualified service technicians.

• Do not use any handset other than a Panasonic handset.
• When a failure occurs which results in the internal parts becoming accessible, 

disconnect the telephone line cord immediately and return this unit to service centre.

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

THIS HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS 
OBJECTS.

IMPORTANT NOTICE:

• The KX-T7710NZ shall not be set to make automatic calls to the Telecom 111 

Emergency service.

• The KX-T7710NZ is designed for use in New Zealand, and can only be used in New 

Zealand.

Note: 

In this manual, the suffix of each model number is omitted.

    2003 Panasonic Communications Co., Ltd.  All Rights Reserved.

Summary of Contents for KX-T7710









Reviews: