background image

LC2H

68

Panel mounting type

One-touch installation type

Panel mounting type

Installation frame type

PC board mounting type

Features

1. 8.7 mm 

.343 inch

 Character Height 

(previously 7 mm)

Easy-to-read character height increased 
from 7 mm to 8.7 mm 

.276 inch to .343 

inch

.

2. Plenty of Digits

3. Counting Speed Switchable between 
2 kHz and 30 Hz
4. Panel Mounting Type Features 2 In-
stallation Methods

Comes with very easy one-touch installa-
tion type and also installation frame type 
that uses the bracket on the timer/counter. 
Choose a method that suits the applica-
tion.

5. Battery Replacement Easy on Envi-
ronment

To replace battery simply remove body for 
the one-touch installation type, and re-
move battery lid for the installation frame 
type.

6. Screw Terminals Designed for Safety

Built in finger protection.

7. Panel Covers Replacable
(Standard color is ash gray.)

Change the panel design by replacing 
with a black panel cover.

8. Conforms to IP66 Protective Con-
struction (Only installation frame 
type.) (Front panel surface)
9. Input Methods

1) Non-voltage input method
2) Voltage input method
3) Free voltage input method

10. Backlight Type Added to Series and 
Now 2-color Switchable (green/red)

Easy viewing even in dark places and 
switchable between green and red (Volt-
age input type).

11. Conforms to Safety Regulations

8.7mm

.343inch

8 digits

Product chart

Product types

1. Panel mounting type

1) One-touch installation type

1

 Standard type

Note) Please ask us about types without front resetting.

Type

Standard type

Backlight type

Installation type

Non-voltage input type

Voltage input type

(4.5 to 30 V DC)

Free voltage input type

(24 to 240 V AC/DC)

Voltage input type

(4.5 to 30 V DC)

Panel 
mounting 
type

One-touch installation type

Installation frame type

PC board mounting type

No. digits

Counting speed

Front reset

Input method

Part No.

8 digits

2 kHz/30 Hz switchable

Yes

Non-voltage input type

LC2H-FE-2KK

Voltage input type (4.5 to 30 V DC)

LC2H-FE-DL-2KK

30 Hz

Free voltage input type (24 to 240 V AC/DC)

LC2H-FE-FV-30

2

 Backlight type

No. digits

Counting speed

Front reset

Input method

Part No.

8 digits

2 kHz/30 Hz switchable

Yes

Voltage input type (4.5 to 30 V DC)

LC2H-FE-DL-2KK-B

LC2H

DIN HALF SIZE 
LCD COUNTER

LC2H.fm  Seite 68  Mittwoch, 29. Mai 2002  4:46 16

02/2003

Summary of Contents for LC2H preset









Reviews: