background image

Thank you for purchasing this Panasonic product.

 

This manual is common to all the models regardless of suffixes of the Model No.

 

z

for India

D: White model, the standard zoom lens supplied

 

z

for Asia (except for Taiwan, Korea) / Oceania

A: White model, the standard zoom lens supplied 

LA: White model, the lens sold separately

 

z

for Taiwan

A: White model, the standard zoom lens supplied

 

z

for Korea

Without L: White model, the standard zoom lens supplied

With L: White model, the lens sold separately (PT-MZ670L, PT-MZ570L only)

 

z

for other countries or regions

Without L / LB: White model, the standard zoom lens supplied 

With L: White model, the lens sold separately

With LB: Black model, the lens sold separately (PT-MZ670LB only)

 

Before operating this product, please read the instructions carefully and save this manual 

for future use.

 

Before using this product, be sure to read “Read this first!” (

x

 pages 5 to 15).

DPQP1200ZE

LCD Projector  

Commercial Use

Operating Instructions

Functional Manual

ENGLISH

Model No. 

PT-MZ670

 

PT-MW630

 

PT-MZ570

 

PT-MW530

Summary of Contents for PT-MZ670L







































































































































































































































Reviews: