background image

INSTALLATION INSTRUCTIONS

Ventilating Fan

Model No. 

READ AND SAVE THESE INSTRUCTIONS

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before attempting to

install, operate or service the Panasonic product. Please

carefully read the “GENERAL SAFETY INFORMATION”.

Failure to comply with instructions could result in personal

injury or property damage. Please explain to users how to

operate and maintain the product after installation and this

manual should be presented to users. Please retain this

manual for future references.

See page 8 for Panasonic Warranty Sheet.

RG-M79A

GENERAL SAFETY INFORMATION

The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage
caused when the denotation is disregarded and improper use is performed.

To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always
observe the following safety precautions.

WARNING

CAUTION

Denotes a potential hazard that could result in serious injury or death.

Denotes a hazard that could result in minor injury.

Denotes a hazard that could result in property damage.

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users not to disassemble the equipment.

This symbol is used to alert users to make sure of grounding when using the equipment with the grounding
terminal.

This symbol is used to alert users to a specific operating procedure that must be followed in order to operate
this unit safely.

This symbol is used to alert users to a specific operating procedure that must not be performed.

For Your Safety

Explanation of symbol word panels

NOTICE

M7 9 A 1 0 4 2 0 A

Summary of Contents for RG-M79A

















Reviews: