VQC7596
F0310RE0
1
2
3
4
1
2
SETUP MIC
1
2
3
1
FRONT
Lch
→
Easy Setting Guide
The order of setting
Blu-ray Disc Home Theater Sound System
Model No.
SC-BT735
Prepare the
speakers
See below
Place the speakers
See below
Connect the
cables
See over
Turn on the
main unit
See over
Smart setup
See Smart setup screen
Prepare the speakers
Place the speakers
Refer to the rear label of the speaker before connecting
the corresponding cable.
Verify the type of speaker with the label on the rear of
the speaker.
Speakers
Front speakers
Front/Avant
Centre speaker
Center/Centre
Surround speakers
Surround/Ambiophonie
e.g.,
Auto speaker setup microphone
(included)
Place the Auto speaker setup
microphone at the actual seating
position. (At ear level when seated.)
Main unit’s front panel
GREEN
GREY
C
RS
RED
R
WHITE
PURPLE
BLUE
LS
SW
L
Recommended
Front speakers
(L, R)
60
120
Surround speakers
(LS, RS)
Label each speaker cable
by attaching the numbered
sticker at the position
indicated in the illustration. Be
sure to match the number on
each sticker with the circled
number in the illustration.
Connect the speaker cables.
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
e.g., Front speaker
Lch
PUSH!
Front speakers
Surround speakers
Centre speaker
Subwoofer
Step 3
Step 4
Step 1
Step 2
WHITE
White
Blue line
Tighten securely.
Leave about 80 mm
Tighten securely.
Front/
surround
speaker
Stand
Base
speaker
Lch
WHITE
Rch
RED
Rch
GREY
GREEN
PURPLE
Press into the groove.
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
: White
: Blue line
Lch
BLUE
PUSH!
Back of the base
Pull the cable straight
along the line and slide
into the groove.
VQC7596̲eng.indd 2-3
VQC7596̲eng.indd 2-3
2010/03/15 17:26:27
2010/03/15 17:26:27
